Allen Bradley 1336-B010-EOD-L3-S1 Used Surplus

The Allen-Bradley 1336-B010-EOD-L3-S1 drive is an induction motor control drive. It produces a 3-phase pulse width modulation or PWM frequency output with adjustable motor speed. The current rating of this drive is 17 Amps. The drive comes with an input voltage rating of 380, 415, or 460 Volts AC and it has a running frequency of 50 to 60 Hertz. Due to the open enclosure of the drive, the drive’s operating temperature should be maintained between 0 and 40 degrees Celsius. The airflow between the heatsink of the drive and the nearest ventilation source should not be obstructed. The air temperature at the drive inlet should match the specified temperature rating. The 1336-B010-EOD-L3-S1 drive has passed all the directives for emissions, immunity, and low voltage. The drive features an overload capability for inverse time. It is protected with a Class 10 level of protection with a speed-sensitive response and it is in compliance with the UL standards. The drive uses the sensorless vector control method to increase the torque performance of the drive. The control algorithm offers outstanding low-speed torque which in turn provides a 120:1 constant torque ratio.

The 1336-B010-EOD-L3-S1 drive also comes with a slip compensation feature. This feature is quite common in the Allen-Bradley 1336 series drives. This feature helps to attain a maximum of 0.5% speed regulation without using any encoder feedback device. The feature is based on the programmed motor flux instead of the drive rated current. It also enhances the torque performance at all speeds. The 1336-B010-EOD-L3-S1 drive uses an IGBT braking system to control the speed of the drive. The drive also supports dual acceleration and deceleration profiles. Both high-speed input and pulse train input are supported by the drive. The drive is compatible with other Allen-Bradley drives and peripherals.