Allen Bradley 1336-B005-EOD-FA2-L3

The 1336-B005-EOD-FA2-L3 belongs to the Classic family of Allen-Bradley’s 1336-series adjustable frequency AC drives. The drive has a frame dimension of 11.13 inches by 8.76 inches by 18.75 inches. For smooth operation, it should have a 75 degrees Celsius rated copper wire with a maximum wire size of 16 millimeters.  The Allen-Bradley 1336-B005-EOD-FA2-L3 has a maximum torque of 2.26 N-m and 9.6 Amps of current output. The Allen-Bradley 1336-B005-EOD-FA2-L3 has “1336” as its bulletin number, which indicates that it can be used with all the 1336-series’ classic modules and it can be upgraded with modern peripherals as well. The code “B005” indicates that the adjustable frequency drive has three phases, it can operate under three voltage inputs; 380 Volts, 415 Volts, and 460 Volts, and it produces 6.3 kVA, 6.9 kVA, and 7.6 kVA, respectively. The AC drive can withstand shocks between 50 and 60 Hertz.

The Allen-Bradley 1336-B005-EOD-FA2-L3 offers two additional functionalities not offered by other members of the same group. The “FA2” in the part number means that the drive offers a basic control panel meant for open-style enclosures, and “L3” indicates that users can configure the wiring of the device by using the Logic Interface Board that operates at 115 Volts AC. Connect the drive to the TB3 terminal block available at the lower end of the main control board for configuring the wiring. These two options are helpful for the programmers because they save time by minimizing manual configuration. The Allen-Bradley 1336-B005-EOD-FA2-L3 belongs to the family of drives that has an open-type enclosure with the lowest protection index. The enclosure type offers no special protection against hazardous chemicals, snow, rain, or water. Make sure that the drive is installed in locations where such hazards are not present. The enclosure’s current rating is 003, 005, 007, or 010. For troubleshooting, testing, installing, or repairing the drive, it is recommended that users go through the manual and understand the working of each and every component of the drive. Make sure that the drive is disconnected from the power supply and has no current flowing before installing or repairing it.