Allen Bradley 20AD3P4C3AYNNNC0 PowerFlex 70 AC Drive 3.4 A at 2 Hp 20A

The Allen-Bradley 20AD3P4C3AYNNNC0 PowerFlex 70 AC Digital Drive is a wall/machine-mounted variable frequency drive with an IP66 (NEMA/UL 4X/12) rated enclosure designed for indoor industrial environments, which is used to provide enhanced motor control in most applications. It has a digitally controlled setup process which ensures repeated and precise control, and unlike some drives in the series, it comes with a full numeric human-machine interface module which can provide multi-lingual text for troubleshooting and programming. The 20AD3P4C3AYNNNC0 has a 6-pulse, voltage input of 480 Volts AC (3-phase) at 50 to 60 Hertz, with a programmable output current of 3.4 Amps, and it has an output power rating of 2.0 Horsepower. It has a line input tolerance range of -10% to 10% at 47 to 63 Hertz, with a rated 0.98 power factor, and with 97.5% operational efficiency. It has BUS voltage regulation, with a programmable current limiting range of 20% to 160% of the full drive current, and it provides 200,000 Amps as the maximum short-circuit rating by using the specified fuse disconnect. The 20AD3P4C3AYNNNC0 offers class 10 motor protection, with an overload capability of 115% for 60 seconds and 150% of the rated load for 3 seconds, and this drive provides over temperature control at the rear side heatsink.

It has removable Metal Oxide Varistor (MOV) which provides a line transient protection of up to 6000 Volts, with protection against ground faults at the output, and it has a control logic ride-through time of 2 seconds. The 20AD3P4C3AYNNNC0 delivers programmable motor control via the volt per hertz control, vector control (with Force technology), which provides outstanding speed and torque control even at a stall, and the sensorless vector control. It uses the sine-coded pulse width modulated control signal with 4 KiloHertz programmable carrier frequency and an output frequency of 0 to 400 Hertz. The 20AD3P4C3AYNNNC0 has a performance level of 0.1% over a 120 to 1 speed range, with +10/-10% torque regulation without an encoder, and it provides a selectable output voltage range of 0 to the rated motor voltage. It provides multiple stop modes, and it offers 2 independent and programmable speed profiles, programmed from 0 to 3600 seconds. The 20AD3P4C3AYNNNC0 has an operational temperature range of 32 to 104 degrees Fahrenheit with 5 to 95% non-condensing humidity, and this drive is stored under –40 to 158 degree Fahrenheit. The 20AD3P4C3AYNNNC0 is c-UL-us, ABS, CE, RCM, and KCC certified, and it weighs approximately 2.71 kilograms with mounting dimensions of 122.4 x 225.7 x 179.8 millimeters.