Allen Bradley 1336E-B075-AE-EN-HA2-L6 Used Surplus

The 1336E-B075-AE-EN-HA2-L6 drive is a 1336 IMPACT drive manufactured by Allen-Bradley. Its ratings are 380 to 480 Volts AC, 56 kilowatts, and 75 Horsepower. It is equipped with a programmer/controller with a digital pot HMI to simplify drive control and programming. Up to 16 programmable speed command transitions are available on this drive and it supports SCANport communication and English as the programming language. The 1336E-B075-AE-EN-HA2-L6 IMPACT drive is designed to provide unmatched speed control. The diagnostics features on this drive provide real-time monitoring for its logic board and power structures. It features 32 entry fault queues and 32 entry warning queues with markers for clearing a fault and powering up with timestamps. The flying start mode on this drive is suitable for motors with already rotating loads.

Like all B-frame 1336 IMPACT drives, the 1336E-B075-AE-EN-HA2-L6 drive does not support network connections via an isolated gateway. Its memory storage is non-volatile and it has a NEMA 1 (IP20)/EMC enclosure as well as a 115 volts AC control interface. The function blocks on this drive provide more flexibility than other drives have. Using long cables to connect the 1336E-B075-AE-EN-HA2-L6 IMPACT drive to motors may require the use of cable terminators or output reactors to reduce voltage reflection at the motor’s terminals. It can be installed with different kinds of cables including shielded, unshielded, and armored cables. This drive is designed to use a 3-phase power supply that is symmetrical to the ground and it supports the use of a line reactor or isolation transformer if the power supply experiences power line conditions that could cause malfunctioning.