Allen Bradley 1336-B010-EAD-FA2-L3-S1

The 1336-B010-EAD-FA2-L3-S1 variable frequency drive is a product of Allen-Bradley/Rockwell Automation featuring a factory-installed basic control panel with NEMA Type 1 or open enclosure ratings. In addition to the basic control panel, this drive has a logic interface board rated at 115 Volts AC and a serial port connector option. The drive’s interface board can be connected to the main control board by using J8 and J9 jumpers, thus increasing the configurations of the control wiring for the 1336-B010-EAD-FA2-L3-S1 drive. This drive uses both male and female jumpers to complete the circuit between 2 different pins. The drive also features a set of options that help with the input of information into the controller, which is then used to set the parameter values. Also, the drive’s options can help in changing the settings of the selector switch.

Troubleshooting of the Allen-Bradley 1336-B010-EAD-FA2-L3-S1 variable frequency drive with other 1336 AC drives can only be done by the use of Range DMM, VOM, or DVM with a capacity of not less than 1000 Volts, an oscilloscope frequency response range of not less than 1 Megahertz, or by the use of the 1336-MOD-E1 hand-held terminal. The drive also features a programming panel, standard local display, and SW1 switch which helps in enabling or disabling the ‘ENTER’ pushbutton and it controls the process of drive programming. Also, the 1336-B010-EAD-FA2-L3-S1 drive can be interfaced by using an optional local control panel that enhances the configuration of the jog, start, and stop functions. When purchasing the 1336-B010-EAD-FA2-L3-S1 drive and the optional panel or interface is not specified in the order, its place will be covered using a blank plate on the drive. The drive comes with a standard display panel or interface that can be used to display error codes to enhance the troubleshooting process.