Allen Bradley 1336-B007-EAD-S1-FA2 Used Surplus

The Allen-Bradley 1336-B007-EAD-S1-FA2 is an adjustable frequency AC drive from the 1336 series. This AC drive is a microprocessor-controlled digital drive used to control the torque and speed of three-phase motors. The 1336-B007-EAD-S1-FA2 features a high-performance motor adjustment over an HMI that is integrated into this module and which has non-volatile parameter storage. This 380 to 460 Volts AC voltage module can produce up to 9 kW of power at its output. When performing the volts per hertz control algorithm, its voltage changes frequency within the range of 0 to 250 Hertz. The Allen-Bradley 1336-B007-EAD-S1-FA2 has a serial communication connector that is used for remote communicating to other industrial automation devices. The device can be programmed by inputting all the necessary parameters through the user interface. This module is enclosed with an IP20 (NEMA Type 1) rated housing.

The drive is equipped with 4 digital outputs for signaling the run, at speed, fault, and the drive alarm states. There is one 0 to 5 Volts DC analog output to give users the information of the frequency or the percent of the drive load current. The Allen-Bradley 1336-B007-EAD-S1-FA2 can be configured with either a circuit breaker or input fuses as a protective device on its input. The module measures 477 millimeters x 283 millimeters x 223 millimeters (18.75 inches x 11.1 inches x 8.8 inches). Users can install it in surroundings with ambient temperatures of less than 40 degrees Celsius (104 degrees Fahrenheit). The device absorbs voltage transients on an incoming power line over pre-installed MOVs. These varistors protect the device from surges.