Allen Bradley 1336-B007-EAD-L1

The Allen Bradley 1336-B007-EAD-L1 Adjustable Frequency AC Drive is a high performance AC drive designed to control 3-phase induction motors in a variety of applications with critical need for speed control. This drive is designed with a Logic Interface Board Option, which provides users with default command function for smooth operation, and like all 1336 Classic drives, it is digitally programmed to ensure precise control and repeated operation. It runs on 380 to 460 Volts, has a 3-phase input, and is designed for a 3-phase direct connection. The 1336-B007-EAD-L1 has input ratings of 13.3 Amperes and 10.6 Kilo Volt-Ampere at 460 Volts, and output ratings of 13.0 Amperes and 10.4 Kilo Volt-Ampere at 460 Volt AC. It has -/+10% acceptable input range, with 0.95 displacement power factor, and it has a power ratio of 0.85 (KW/KVA). It has an 810 Volt DC BUS DC overvoltage trip with a 388 Volt DC under voltage trip, and it provides programmable current limiting with 50% to 150% range of rated output current. The 1336-B007-EAD-L1 is designed to automatically detect/sense ground fault from irregular current input, and it provides real-time maintenance via it self-diagnostic capabilities on start-up and during operation. It is protected from transient voltage via a metal oxide varistor (MOV), which also provide protection against phase to phase and ground fault at the output. It has 180% overload capability, and can ride faultlessly through 2 seconds (or more) power loss duration. It provides users with a selectable motor speed option, via sine coded pulse width modulated output signal and adjustable output frequency, programmable from 0 Hertz to 250 Hertz. It has 2 different acceleration and deceleration times, programmed differently from 0 to 600 seconds, and it provides Class 10 motor overload protection. This module’s interface is a +5 Volt DC signal and commands is interface and sent to the main control board using a 5 Volt DC Logic Control Interface Board option with contact closure terminal, which is self-powered and requires no additional power source. The 1336-B007-EAD-L1 has an ambient cabinet temperature of 0 to +40 degree Celsius, and is enclosed with NEMA Type 1 (IP20) enclosure designed to provide protect personnel from contact with hazardous component on the factory floor. It weighs approximately 16.5 Kilogram, with 283 x 477 x 223 millimeters sipping volume, and it is designed to withstand 15G operational shock.