Allen Bradley 1336-135893

The 1336-135893 is a Precharge PCB, manufactured by Allen Bradley to provide exceptional performance for factories and other facilities that depend on heavy-duty operating equipment to assist with the control over motor models. The device is part of the Allen Bradley 1336 Adjustable Frequency AC Drive spare part catalog and is used in cases where the pre-fitted PCB board has an operational fault, or when an upgrade to an existing drive is required in order to comply with facility requirements and to deliver a better compatibility list. The 1336-135893 has a rating code of B075, along with a single rating per drive. The PCB provides a high-performance operating output that ensures adequate functionality within factories that demands continuous performance from installed drives. The PCB should only be installed by a trained professional, due to the complex set of wiring and soldering operations that need to be performed during the installation and repair of the board, as well as the Adjustable Frequency AC Drive that requires a repair or an upgrade.

This device comes with a full set of installation and repair instructions, which should be followed carefully to ensure all wires are connected to the correct locations. Such a procedure will assist with reducing the risk of future operational faults, as well as provide a reduction in the risk of hardware failures or power surges when the Adjustable Frequency AC Drive is switched on post-installation of the PCB. Once the 1336-135893 has been installed, the device where the PCB is installed might need some initial re-configurations to be executed. This will ensure the programming of the device, along with the setup of the configurations, will comply with the features provided by the PCB board and account for any particular differences that may be present between the 1336-135893 and the previous one that was installed in the Adjustable Frequency AC Drive prior to the installation of the new board.