Allen Bradley 20BD1P1A0AYNANC0 PowerFlex 700 AC Drive 20B Used Surplus

The Allen-Bradley 20BD1P1A0AYNANC0 PowerFlex 700 Adjustable Frequency AC Drive is an AC digital drive in the PowerFlex 700 family of variable frequency drives which provides digital control for 3-phase industrial motors, in a wide range of applications. The 20BD1P1A0AYNANC0, like every PowerFlex 700 drive, supports the zero stacking installation, which allows for stacking multiple drives in a compact space, thereby saving space, and it has an IP20 NEMA (Type 1) rated indoor industrial enclosure. It has a 3-phase operating voltage of 480 Volts AC at 60 Hertz, with a maximum power rating of 0.5 Horsepower for both normal and heavy-duty operation, and it has an acceptable voltage range of -10%/+10% at 47 to 63 Hertz. this AC drive has 0.98 displacement power factor across entire speed range, and it has an operational efficiency of 97.5%, with 200,000 Amps maximum short circuit rating. The 20BD1P1A0AYNANC0 provides both under voltage and over voltage AC trips, and it also provides microprocessor temperature control at the heatsink. It has a removable Metal Oxide Varistor (MOV), which provides up to 6000 Volts transient line protection, and it also provides protection against the ground fault. The 20BD1P1A0AYNANC0 offers 2 seconds (typical) logic ride thru time, and it has a maximum power loss ride through time of 15 milliseconds at full load.

This drives features high-performance motor control selectable from the Sensorless Vector control, the Enhanced Vector control, and the Standard Volt per Hertz control, and it uses sinusoidal PWM signal with a 2 to 10 KHz (programmable) frequency range for output control. The 20BD1P1A0AYNANC0 has a programmable 0 to 420 Hertz output frequency range and an adjustable 0 to the rated motor voltage output voltage range. The 20BD1P1A0AYNANC0 also has digital and analog control inputs, with accuracies within ±0.01%, and ±0.4% of the maximum output frequency, and it provides ±0.5% speed performance, across a 40: 1-speed range. This drive offers independently and programmable Accl/Decl times, and it has an overload capability of 115% for 1 minute, and 150% for 3 seconds. It provides Class 10 Electronic Motor Overload Protection, and it also provides multiple programmable stop modes. The 20BD1P1A0AYNANC0 has a designated 32 to 104 degrees Fahrenheit functioning temperature range, at 5 to 95% non-condensing relative humidity, and it is built for use at a maximum height of 1000 meters without losing its standard functions. It weighs approximately 5.22 kilograms, with a total volume of 110.0 x 336.0 x 200.0 millimeters, and it is UL, cUL-us, and CE certified.