Allen Bradley 20BD034A0AYNAEC0 Used Surplus

The Allen-Bradley PowerFlex 700 series drives are manufactured to deliver out-of-the-box performance and it provides an efficient solution for modern industrial needs. The Allen-Bradley 20BD034A0AYNAEC0 PowerFlex 700 series drive is widely used for the lifting, oil well, speed, and positioning applications of different AC motors. As per the common industrial protocol, the 20BD034A0AYNAEC0 uses the Ethernet/IP adapter for communication. All the activities of the drive are displayed on the front face alongside the blank cover of the drive. The 20BD034A0AYNAEC0 drive comes with a position indexer/speed profiler which uses a 16-step indexer to provide point-to-point outage by using the rotating energy stored in high-inertia, low-friction loads. The TorqProve feature assures control of the load when it is transferring control between the drive and a mechanical brake.

Using 480 Volts of AC power and 34 Amps of current, the 20BD034A0AYNAEC0 can generate 25 Horsepower of output under normal load activity. The conformally-coated Frame 2 body supports panel mounting with an IP20 rated enclosure for mounting the drive in different cabinet positions. The drive supports multiple stop modes including the ramp, coast, DC-brake, ramp to hold, and the S-curve modes. The drive has been certified with different standard ratings including the CE standards. The drive has a power ride thru of 15 milliseconds at a full load and it has a control logic ride thru of 0.5 seconds minimum. The drive features both ground fault trip and short circuit trip protection. The 20BD034A0AYNAEC0 is equipped with an IGBT braking system without the braking resistor. The drive is installed with the CE filter and CM choke. The drive can regulate torque with an open loop or with encoder feedback. The drive provides +/-5% of torque regulation with the open-loop and +/-2% with the encoder feedback. It also has the ability to hold a full load at zero speed.