Allen Bradley 20AB042F0AYNANC0 PowerFlex 70 AC Drive 42 A at 15 Hp 20A

The Allen-Bradley 20AB042F0AYNANC0 is a three-phase PowerFlex70 low-voltage drive that is manual and features a standard break, a flange-mounted NEMA/UL Type 1, IP20 front chassis enclosure, and NEMA/UL Type 4X/12, IP66 (for indoor or outdoor use) rear heatsink enclosure. Note that this drive does not have an installed human interface module, or HIM, nor a communication slot and instead of a feedback, this drive features enhanced control. This drive uses a D frame and has an input voltage range of 200 to 240V AC. At an input of 208V AC, which is achieved by programming the 20AB042F0AYNANC0 drive to a lower voltage, it has outputs of 43 A when continuous, 55.5 A for 1 minute, and 74 A for 3 seconds, as well as a kW rating of 7.5 kW at heavy-duty and 11 kW at normal duty. For a 240V AC input, this drive features a 42 A output when continuous, 46.2 A output for 1 minute, and 63 A output for 3 seconds, as well as 10 HP output at heavy duty and 15 HP output at normal duty.

Users can use the 20AB042F0AYNANC0 drive for different applications, including closed loop speed regulation, open loop speed regulation, and precise torque and speed regulation. It also has a common industrial protocol (CIP) for communication, P-jump, and traverse for Fiber application, and speed and torque control that users can use with or without any encoder feedback. Control options for the motor of the 20AB042F0AYNANC0 drive include sensorless vector control, flux vector control, and volts per Hertz control. When using the drive at a location without corrosive particles, make sure that the temperature ranges from 0 to 50 °C and store it at temperatures ranging from -40 to 70 °C.