Allen Bradley 1391-T035DT Used Surplus

The Allen-Bradley 1391-T035DT servo controller is a 3-phase servo controller that has been designed to operate with different electromechanical and servo motors. This controller not only controls and modifies the speed of the motor but also helps it to operate while aligned in the proper position at all times. It has been manufactured by Allen-Bradley/Rockwell Automation. This controller comes with a power transformer, an input bridge rectifier, and a power supply filter capacitor. The Allen-Bradley/Rockwell Automation 1391-T035DT 3-phase servo controller has been designed to operate with different voltage and phase ratings. These different ratings can be used depending on the overall application and the motor attached to the controller. It comes with 3-phase voltages of 240 and 480 Volts AC and a secondary voltage rating of 230 Volts AC and for single-phase voltages of 35 Volts AC each. All of these ratings can be used at a frequency of 60 Hertz. These specifications need to be compared with the motor specifications to guarantee that both the motor and the controller can operate properly.

The Allen-Bradley/Rockwell Automation 1391-T035DT 3-phase servo controller needs to be installed vertically on a rigid and flat surface that can withstand normal industrial vibrations and shocks. This installation must have good ventilation so that the controller can release heat and ventilate properly. It is also recommended to leave spaces between the controller and other equipment to avoid overheating. When installing the Allen-Bradley/Rockwell Automation 1391-T035DT 3-phase servo controller, ensure that the motor cables must not be longer than the regulation length since excessive length can cause power and voltage loss. These cables must be rated for operations at 70 degrees Celsius.