Allen Bradley 1305-BA04A-ES-HAP

Allen-Bradley manufactures the 1305-BA04A-ES-HAP Variable Frequency Drive. It is a programmable AC drive intended to provide a control solution for the speed of 3-phase induction motors. It features an output power rating of 1.5 kilowatts or 2 Horsepower with an output current of 4 Amps as well as drive adjustable output voltage from 0 to a typical input voltage rating of 460 Volts AC at a programmed input frequency range of 0 to 400 hertz. It is programmed in the Spanish language and features an IP 30, NEMA Type 1 enclosure type rating. This drive has a maximum draw load of 250 milliamps on all its ports, and when it is in operation, it dissipates 52 Watts as heat. The 1305-BA04A-ES-HAP AC drive has an input efficiency rating of 97.5% and operates on a power supply voltage range of 380 to 460 Volts AC at 50 to 60 Hertz frequency with 3.1KVA of apparent input power. This drive features a configurable contact closure input of 5 Volts DC with configurable inputs for start, reverse/forward, and stop control as well as 2 analog inputs with 250 ohms and 100 ohms rated load limits at a 10-bit resolution.

The Allen-Bradley 1305-BA04A-ES-HAP variable frequency drive has a 5 Amps programmable relay control Output 1 rating and it has 2 Amps of inductive rating at 30 Volts DC or 115 Volts AC. It has an 8-bit resolution load capacity of more than 4000 ohms and it provides modulation signal frequency with the sine weighted pulse width algorithm. The 1305-BA04A-ES-HAP drive provides a 150% braking torque via an external resistor but it has the capacity of 50% dynamic braking without an external resistor. It also has a programmable current limiting capacity range from 20 to 150% of the full current load for 60 seconds and 200% of the full current load for 2 seconds.