Allen Bradley 1305-AA12A-EN10 Used Surplus

The Allen-Bradley 1305-AA12A-EN10 AC drive is an adjustable frequency drive that runs on AC power. It is manufactured by Rockwell Automation under the Allen-Bradley brand. Make sure that the 1305-AA12A-EN10 is correctly installed and applied. Improper voltage on the control terminals, the use of improper bypass or output circuits, including ones that are not connected directly to the motor, or the use of an inadequate or incorrect AC power supply can result in damage to the drive or reduce its output and its product life. Ensure that the temperatures around the drive are not excessive because heat can damage the drive too. To minimize excessive heat, install the 1305-AA12A-EN10 drive with spaces of at least 3 inches on either side of it and spaces of 2 inches above and below it for ventilation.

The Allen-Bradley 1305-AA12A-EN10 adjustable frequency drive weighs about 9.2 pounds. Its dimensions are 210 x 195 x 179 millimeters, which makes it easy to install on almost any machine system. This drive can be installed with an RFI filter, that protects it from unwanted radiofrequency. This filter is usually only necessary if other sensitive devices are installed near the drive on the same AC power supply or if the drive is using a cable that is more than 250 feet long. An RFI filter can also be used to achieve very low levels of emissions. The 1305-AA12A-EN10 drive can also accommodate shielded cables if the drive is powering machinery that has sensitive circuits or other devices connected to it or mounted on it.