Allen Bradley 20BD014A3AYNANC0 PowerFlex 700 AC Drive 14 A at 10 Hp 20B

The 20BD014A3AYNANC0 is a 3-phase PowerFlex 700 Drive manufactured by Allen-Bradley. It has ratings of 480 Volts AC, 60 Hertz, 14 Amps output, 10 Horsepower, and 24 Volts DC input/output voltage. This drive features vector control which provides world-class torque regulation and outstanding low speed/zero speed performance. The 20BD014A3AYNANC0 drive has a full numeric keypad and an LCD user interface. It features a manual that facilitates fast and easy first-time installation. The drive incorporates a dynamic brake transistor and it has several modes of operation such as the flying start, ramp-to-hold, coast-to-stop, and the ramp-to-stop. The high-speed analog inputs available on the 20BD014A3AYNANC0 PowerFlex 700 drive greatly improve its responsiveness to speed and torque commands, and its proactive current limit and bus regulation allow it to achieve maximum acceleration and deceleration speeds without tripping.

Shielded and unshielded cables can be used to install the 20BD014A3AYNANC0 PowerFlex 700 drive. The drive’s immunity to externally generated interference is good but Allen-Bradley recommends that the cables be routed away from sensitive equipment to avoid interference with the equipment in applications with unshielded cables. The 20BD014A3AYNANC0 PowerFlex 700 drive features electromagnetic filtering and it has a CM choke. It has droop control for controlling multiple motors simultaneously and it also features common mode capacitors and a removable MOV to ground which allows for it to be used in grounded and ungrounded distribution systems. The 20BD014A3AYNANC0 PowerFlex 700 drive is designed to connect directly into a 3-phase power source as long as the power source is not prone to frequent disturbance.