Allen Bradley 20BD096A3AYNAND0 Used Surplus

The Allen-Bradley 20BD096A3AYNAND0 is a speed drive that comes with an amperage rating of 96 Amps and an input voltage of 480 Volts AC. It can be used at its full rating with three-phase apps and at an altitude of 1000 meters. The main function of the Allen-Bradley 20BD096A3AYNAND0 speed drive is to control induction and electromechanical motors. This is done through the variances in the input voltage and frequency of the motor. Drives of this kind are widely used in the control industry and nowadays these come equipped with features that facilitate every process. The Allen-Bradley 20BD096A3AYNAND0 speed drive comes with an IP20 enclosure that stops dirt and dust particles from getting into the drive. It also provides a mounting mechanism and it preserved the essential connections of the drive. This enclosure is a regular enclosure and it can be turned into an open enclosure by removing one of its parts located on top of it. Once done, it cannot be reversed.

The Allen-Bradley 20BD096A3AYNAND0 speed drive has a vector I/O with a voltage of 115 Volts and it requires the installation of a communication module. This communication module should be compatible with the protocol used in the whole network. Usually, when connected to a communication adapter and a network the drive can function better. Prior to the start-up of the Allen-Bradley 20BD096A3AYNAND0 speed drive, it needs to be grounded, cables should comply with regulations and ventilation in the room must be appropriate. Once the drive has been programmed for the first time and while tests with the motor are being done, it might be possible to reprogram the drive more than once. For this programming process, it is necessary a display or any other form of human interface. The Allen-Bradley 20BD096A3AYNAND0 speed drive comes with a display integrated.