The picture shown is for representative purposes only. The actual product delivered corresponds to the part number you ordered.
Texnite is not an authorized distributor, reseller, or representative of the products displayed or mentioned on this website. All product names, trademarks, brands, and logos used or referred to on this site remain the property of their respective owners. The depiction, description, or sale of products showcasing these names, trademarks, brands, and logos is solely for identification purposes and does not imply or intend to indicate any affiliation with or authorization by any rights holder.
Speak with a real person who will go out of the way to help!
| Manufacturer | Rockwell Automation |
| Brand | Allen-Bradley |
| Part Number/Catalog No. | 20BD096A0ANNADD0 |
| Voltage | 480V AC |
| Phases | 3 |
| Precharge | - |
| Amps | 96 |
| HP | 75 |
| Frame | 5 |
| Enclosure | IP20, NEMA/UL Type 1 |
| Operator Interface | Blank Cover |
| Documentation Type | Manual |
| w/Brake | No |
| w/Resistor | No |
| CE Filter | Yes |
| CM Choke | Yes |
| Network Type | DeviceNet |
| Control | Vector |
| I/O Volts | 115V AC |
| Feedback Type | None |
| Manufacturer | Rockwell Automation |
| Brand | Allen-Bradley |
| Part Number/Catalog No. | 20BD096A0ANNADD0 |
| Voltage | 480V AC |
| Phases | 3 |
| Precharge | - |
| Amps | 96 |
| HP | 75 |
| Frame | 5 |
| Enclosure | IP20, NEMA/UL Type 1 |
| Operator Interface | Blank Cover |
| Documentation Type | Manual |
| w/Brake | No |
| w/Resistor | No |
| CE Filter | Yes |
| CM Choke | Yes |
| Network Type | DeviceNet |
| Control | Vector |
| I/O Volts | 115V AC |
| Feedback Type | None |
The 20BD096A0ANNADD0 is a frame 5 adjustable frequency AC drive that has been fully designed to be combined with three-phase induction and electromechanical motors. It works with a three-phase voltage of 480 Volts AC and a frequency of 50 Hertz. Its specifications can be adjusted in order to fit single-phase applications requirements. This drive belongs to the Powerflex 700 family by Allen-Bradley. The Allen-Bradley 20BD096A0ANNADD0 frame 5 adjustable frequency AC drive comes contained in a general purpose enclosure. This enclosure provides the required protection against solid particles while at the same time providing a mounting mechanism. It is important that when mounting the drive, clearances are left between the drive and any other equipment that could be blocking air flow. It is imperative that the drive has a proper ventilation mechanism since overheating can hugely diminish the product’s functioning lifespan.
The Allen-Bradley 20BD096A0ANNADD0 frame 5 adjustable frequency AC drive has a DeviceNet communication adapter and a 115 Volt vector control Input/Output. Both of these features provide a mean of communication with other drives and with the whole network. There are certain premises to install the Allen-Bradley 20BD096A0ANNADD0 frame 5 adjustable frequency AC drive. The cable type must be a cable intended for 700 Volt AC operations and the wiring must be manufactured in copper and must have a resistance of 75 degrees Celsius. The drive must be grounded, the input voltage and frequency must be checked before starting the drive, and prior to the start-up, several programming steps might need completion. The use and installation of a Human-Module Interface all along with the drive is fully recommended.
Allen Bradley
