Speak with a real person who will go out of the way to help!
The picture shown is for representative purposes only. The actual product delivered corresponds to the part number you ordered.
Revisions: Ser A
Description: The 20-750-ENC-1 is an incremental encoder module. This module is used with the PowerFlex 753, PowerFlex 755, PowerFlex 755TL and PowerFlex 755TR. It supports single ended or differential operation and constant current sink operation. It has a maximum input operating voltage of 5V DC min to 15V DC, sourcing, 10 mA.
Texnite is not an authorized distributor, reseller, or representative of the products displayed or mentioned on this website. All product names, trademarks, brands, and logos used or referred to on this site remain the property of their respective owners. The depiction, description, or sale of products showcasing these names, trademarks, brands, and logos is solely for identification purposes and does not imply or intend to indicate any affiliation with or authorization by any rights holder.
Texnite is NOT an authorized distributor, affiliate or representative for the Manufacturer.
Product is surplus. Manufacturer's warranties do NOT apply.
Product is surplus. Manufacturer's warranties do NOT apply.
Allen Bradley 20-750-ENC-1 PowerFlex 750 Encoder Option module
Allen Bradley
Revisions: Ser A
Description: The 20-750-ENC-1 is an incremental encoder module. This module is used with the PowerFlex 753, PowerFlex 755, PowerFlex 755TL and PowerFlex 755TR. It supports single ended or differential operation and constant current sink operation. It has a maximum input operating voltage of 5V DC min to 15V DC, sourcing, 10 mA.
QUICK DELIVERY
FREE SHIPPING
1 YEAR WARRANTY
EASY RETURNS
Reviews
20-750-ENC-1
Description: PowerFlex AC Drive User Installed Options, Spare Parts and Demo Units
I/O and Vector Kits
PF750 Incremental Encoder Module
PF750 Incremental Encoder Module
The product offered is sold as used surplus. Texnite is not an authorized surplus dealer or affiliate of the Manufacturer associated with this product. It's possible that the product may contain older date codes or belong to an earlier series compared to items available directly from the factory or authorized dealers. As Texnite is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply.
Although numerous Allen-Bradley PLC products may contain pre-installed firmware, Texnite does not confirm whether a PLC product has firmware or if the firmware corresponds to the revision level required for your specific application. Additionally, Texnite does not guarantee or imply your capability or entitlement to download or acquire firmware for the product from Rockwell, its distributors, or any other source. Furthermore, Texnite does not assert your right to install any such firmware on the product. Texnite neither obtains nor provides firmware on behalf of customers. It remains your responsibility to adhere to the terms stated in any End-User License Agreement or a similar document related to obtaining or installing firmware.
Technical Specifications for 20-750-ENC-1
| Compatible Drives: | PowerFlex 753, PowerFlex 755, PowerFlex 755TL, PowerFlex 755TR |
| Operating mode: | Single-channel mode; Dual channel mode |
| Maximum Input Frequency | 250 kHz |
| Maximum cable length @ 12VDC | 183 m (600 ft) |
| Maximum cable length @ 5VDC | 30 m (100 ft) |
| External power | supported |
| Current consumption | 250 mA |
| Maximum high-state voltage | 0.4 VDC |
| Minimum high state voltage | 3.5 VDC |
| Input voltage: | 5-15VDC |
| Part Number | 20-750-ENC-1 |
| Product Family | PowerFlex 750 |
| Description | Incremental encoder module |
| Brand | Allen-Bradley |
| Product Type | Incremental Encoder Card |
| Manufacturer | Rockwell Automation |
| Used with | Powerflex 755 |
| Power | 24V DC |
| UPC | 884951062504 |
| Compatible Drives: | PowerFlex 753, PowerFlex 755, PowerFlex 755TL, PowerFlex 755TR |
| Operating mode: | Single-channel mode; Dual channel mode |
| Maximum Input Frequency | 250 kHz |
| Maximum cable length @ 12VDC | 183 m (600 ft) |
| Maximum cable length @ 5VDC | 30 m (100 ft) |
| External power | supported |
| Current consumption | 250 mA |
| Maximum high-state voltage | 0.4 VDC |
| Minimum high state voltage | 3.5 VDC |
| Input voltage: | 5-15VDC |
| Part Number | 20-750-ENC-1 |
| Product Family | PowerFlex 750 |
| Description | Incremental encoder module |
| Brand | Allen-Bradley |
| Product Type | Incremental Encoder Card |
| Manufacturer | Rockwell Automation |
| Used with | Powerflex 755 |
| Power | 24V DC |
| UPC | 884951062504 |
About 20-750-ENC-1
The Allen-Bradley 20-750-ENC-1 is an incremental encoder module that is used in compatibility with The PowerFlex 753, PowerFlex 755, PowerFlex 755TL and PowerFlex 755TR adjustable frequency AC drives. This encoder module provides the capability of implementing loop positioning control which is one of the supported control capability of the PowerFlex 700 class drives.
This encoder module is specifically compatible for use with installation in PowerFlex 753 Port 4 and 5 for Frame A drives; and Ports 4, 5 and 6 for Frame 2 and higher drives. It may also be used with PowerFlex 755 drives and installed to ports 4 and 5 for Frame 1 drive and ports 4,5,6 and 7 for PowerFlex Frame 2 drives and higher. If used with PowerFlex 755T, it may be installed in ports 4,5,6,7 and 8 of Frame 5-15 drives.
The 20-750-ENC-1 supports Single-Ended or differential operation. It has a constant current sink operation with approximate consumption of 10 mA. The modules operates as an input voltage range of 5VDC - 15VDC with sourcing current consumption of 10 mA. The encoder’s channel has a minimum high state voltage of 3.5VDC while the maximum low state voltage is 0.4 VDC. Wire connection to the encoder module must not be more than 30 m (100 ft) at 5V, 183 m (600 ft) at 12V. It is compatible with input devices that has a switching frequency of 250 kHz. This encoder module supports Powered by Drive and Separately Powered Encoder supply configuration. It has a TB1 terminal that is composed of 14-pins for wiring of signal and supply voltage.
The 20-750-ENC-1 module is a single incremental encoder feedback option module. It can be used with PowerFlex 753 and PowerFlex 755 drives in the Allen-Bradley PowerFlex 750 series. The specifications for the module input include the use of differential or single-ended operation or constant current sink operation at approximately 10 milliamps. The 20-750-ENC-1 module supports a minimum of 5 Volts DC to a maximum of 15 Volts DC sourcing voltage at 10 milliamps. The minimum high-state voltage is 3.5 Volts DC and the maximum low-state voltage is 0.4 Volts DC. The maximum cable lengths supported are 30 meters at 5 Volts DC and 183 meters at 12 Volts DC. The maximum input frequency can be 250 kilohertz. When not in use, the 20-750-ENC-1 should be kept in an environment where the ambient temperature range is between -40 and 70 degrees Celsius. To prevent damage, the module should not be installed in a drive which is installed in a corrosive environment. The recommended range for the relative non-condensing humidity around the module is from 5 to 95%. The module is rated by the CE, ABS, SEMI F47, KCC, EAC, RCM, and RINA standards.
This encoder module is specifically compatible for use with installation in PowerFlex 753 Port 4 and 5 for Frame A drives; and Ports 4, 5 and 6 for Frame 2 and higher drives. It may also be used with PowerFlex 755 drives and installed to ports 4 and 5 for Frame 1 drive and ports 4,5,6 and 7 for PowerFlex Frame 2 drives and higher. If used with PowerFlex 755T, it may be installed in ports 4,5,6,7 and 8 of Frame 5-15 drives.
The 20-750-ENC-1 supports Single-Ended or differential operation. It has a constant current sink operation with approximate consumption of 10 mA. The modules operates as an input voltage range of 5VDC - 15VDC with sourcing current consumption of 10 mA. The encoder’s channel has a minimum high state voltage of 3.5VDC while the maximum low state voltage is 0.4 VDC. Wire connection to the encoder module must not be more than 30 m (100 ft) at 5V, 183 m (600 ft) at 12V. It is compatible with input devices that has a switching frequency of 250 kHz. This encoder module supports Powered by Drive and Separately Powered Encoder supply configuration. It has a TB1 terminal that is composed of 14-pins for wiring of signal and supply voltage.
The 20-750-ENC-1 module is a single incremental encoder feedback option module. It can be used with PowerFlex 753 and PowerFlex 755 drives in the Allen-Bradley PowerFlex 750 series. The specifications for the module input include the use of differential or single-ended operation or constant current sink operation at approximately 10 milliamps. The 20-750-ENC-1 module supports a minimum of 5 Volts DC to a maximum of 15 Volts DC sourcing voltage at 10 milliamps. The minimum high-state voltage is 3.5 Volts DC and the maximum low-state voltage is 0.4 Volts DC. The maximum cable lengths supported are 30 meters at 5 Volts DC and 183 meters at 12 Volts DC. The maximum input frequency can be 250 kilohertz. When not in use, the 20-750-ENC-1 should be kept in an environment where the ambient temperature range is between -40 and 70 degrees Celsius. To prevent damage, the module should not be installed in a drive which is installed in a corrosive environment. The recommended range for the relative non-condensing humidity around the module is from 5 to 95%. The module is rated by the CE, ABS, SEMI F47, KCC, EAC, RCM, and RINA standards.