Allen Bradley 1336-B010-EAD Used Surplus

The 1336-B010-EAD is an Adjustable Frequency AC drive, manufactured by Allen-Bradley for control of three-phase motors. This drive is a solid-state device with microprocessor controller which can handle a wide variety of induction motors with a power rating up to 11.5 kW. This bulletin 1336 must be supplied with 380, 415, or 460 Volts AC power at its input side. It can deliver up to 13 Amps of current at the output side. The 1336-B010-EAD has two independently calibrated acceleration and deceleration times (adjustable in 0 to 600 seconds range) and multiple jog speeds activated by input signals. The Allen-Bradley 1336-B010-EAD AC drives are an advanced solution for automation system movement control because they provide a smooth and consistent motor shaft movement. This will result in reduced motor heating and extended life of the motor and the drive itself. The overload capacity of the drive is 150% of nominal current rating. Although this AC drive has only standard options that were initially installed at the factory, you can always upgrade it with additional features.

For the surge protection, this drive has MOVs (metal oxide varistors) integrated. It will eliminate phase-to-phase and phase-to-ground short-cuts. This module has IP20 protecting housing, so it can’t protect its electronics from water splashing. The dimensions of the drive are 223 x 283 x 477 millimeters (8.76 x 11.13 x 18.75 inches). This drive should only be operated in surroundings with air temperatures between 0 and 40 degrees Celsius (32 to 104 degrees Fahrenheit). This module weighs approximately 31.3 pounds (14.2 kilograms).