Allen Bradley 1326AB-B430G-21 Used Surplus

The Allen-Bradley 1326AB-B430G-21 module is a type of servo motor. It has the voltage of 380 to 460 Volts AC, a frame diameter of 108 millimeters, and a rated motor speed of 5000 RPM. The device further has flange and shaft series with an IEC metric-flange that uses a keyway, and it has a motor rated torque of 6.4 N-m and a motor rated output of 2.3 Kilowatts. It has a system continuous torque of 6.4 N-m, and a system peak stall torque of 17.2 N-m and the standard option is not applicable. The 1326AB-B430G-21 features a specially designed housing that decreases the motor strength and up-surges the uninterrupted torque evaluations. This great performance, 3-phase, brushless, AC, synchronous motor is intended to meet the rigorous requirements of high-performance motion arrangements. This 460 Volts AC servo motor is designed to use the Allen-Bradley 1394 motion regulator system.

Every 1326AB-B430G-21 servo features an exceptional flux outline permanent magnet that is designed to increase servo comeback. A 3-phase, sinusoidal coiled stator field is provided for action even at low speeds. Moreover, the servo motor features an extruded aluminum casing for upgraded heat transmission. It has a 100% constant rated output turning force even at a stall (RPM). It has the ability to be uprightly mounted at any angle by using the shaft pointing up or else down. The 1326AB-B430G-21 has a multi-turn outline that offers correct absolute machine situations over numerous revolutions (no batteries required) to eradicate machine re-homing on power-up. It offers one million total responses per revolution and absolute placing at 4,096 revolutions. For both mounting options, there are features on the panel EEPROM for keeping the motor outline information.