Allen Bradley 1326AB-A2E-11 Used Surplus

The 1326AB-A2E-11 is a High-performance Servomotor manufactured by Allen-Bradley that is typically used to implement motion control especially in manufacturing and production industry. Motion control systems are typically used in assembly lines.

Servomotors are motors that are built with a feedback system to provide the current position of the motor. Additionally, it must have an effective dynamic braking system to allow immediate breaking to the position desired. Servomotors are always used with a Servo controller such as 1394 Servo controller product family which is made also by Allen-Bradley.

This particular product of Allen-Bradley is built with an improved servo response through the internally installed permanent magnet motor with a 3-Phase sinusoidal wound stator intended for direct transfer of heat. This servo motor supports up and down mounting of vertical shaft.

This servo motor is built with an integral brake, Viton Shaft Oil seal with an option to add components such as feedback mounting kits, Blower cooling kits, and Resolver / Encoder feedback packages.

The 1326AB-A2E-11 features a Holding Brake w/90V DC Coil. By default, this motor is rated IP65 however, when installed with externally mounted feedback and blower kits are used, IP65 rating is negated. This is important to consider especially in areas where dust is present and water jets are frequently happening. It installation of such packages cannot be avoided, the srvo motor must be installed with external protection.

Further details for the servomotor include a Normally closed thermal switch installed in the motor winding that provides thermal overload indication.

The 1326AB-A2E-11 is a servo motor from the 1326 product bulletin by Allen Bradley. The 1326AB-A2E-11 has a rated speed of 3000 RPM and has a power output of 1.1 kW. This module operates on a current of 5.2 Amperes and the operating temperature of the environment in which the motor is used should be no greater than 40 degrees Celsius. Ensure that the ambient operating temperature is maintained, as operating the motor at a higher temperature may reduce the life expectancy of the device. The 1326AB-A2E-11 should also be used with the 1394 series of motion control system. The 1326AB-A2E-11 has a specially, which increases the servo response; these are also made by Allen Bradley. The aluminum housing of this module provides a highly improved heat transfer. The motor is UL certified and also has the ability to be mounted vertically with the shaft in the up or the down direction. This motor contains an internal thermal switch, which indicates thermal overload and acts as a thermal protection for the motor. The 1326AB-A2E-11 must be mounted in place by a trained and qualified professional only. Make sure that the motor is mounted securely in place and the shaft is coupled correctly prior to turning the power on to the drive of the motor. It is recommended to follow the instructions supplied by the manufacturer to ensure satisfactory operation of the device and for the safety of the equipment and the operator.