Allen Bradley 2090-CFBM7DF-CEAA30

The 2090-CFBM7DF-CEAA30 is part of the 2090 cable series from Allen-Bradley. This cable is compatible for use as motor/actuator cable, categorized as a SpeedTEC Cable primarily used as Motor Feedback. It specifically connects SIN/COS High-Resolution/Resolver Encoder Type through the flying leads available on one end and connects to the appropriate servo controller via the SpeedTec DIN Connector on the other end. This cable is a standard or non-flex cable measuring 30 meters. When planning cable installation and layout, the 2090-CFBM7DF-CEAA30 has a cable diameter of 9.8 millimeters or (0.39 inches) while the statis bend radius requirement of this cable must be Seven (7) times than the cable diameter specifically, 68.6 millimeters or 2.7 inches. With static bend, cable bending must not begin within the specified length of the static bend. For establishing a connection, the 2090-CFBM7DF-CEAA30 comes with a slot that aligns to the slot of the female connector to eliminate wrong improper connections. This motor feedback cable has Seventeen (17) pin connectors. Pin 1 is SIN+/AM+; Pin 2 as SIN-/AM; Pin 3 COS+/BM+; Pin 4 COS-/BM; Pin 5 DATA+/IM+/R1; Pin 6 DATA-/IM-/R2; Pin 9 EPWR 5V; Pin 10 ECOM; Pin 11 EPWR 9V; Pin 13 TS+; Pin 14 TS and Pin 12 as ECOM. Each cable connector is a 22 AWG wire except the shield wire which is a 36 AWG shield. Internally, ECOM (10), TS- and ECOM (12) are shorted while twisted pair wires are Pin 1 and 2; Pin 3 and 4; Pin 5 and 6; Pin 9 and 10; Pin 11 and 13.

The Allen-Bradley 2090-CFBM7DF-CEAA30 cable is a motor feedback cable. It is part of the 2090 Kinetix motion accessories product line. The length of the 2090-CFBM7DF-CEAA30 cable is 30 meters. The 2090-CFBM7DF- CEAA30 cable comes with a threaded DIN connector on the end which connects to the motor and the other end of the cable comes with a flying lead. The 2090-CFBM7DF-CEAA30 cable should be used with a SIN/COS high resolution and resolver device. The 2090-CFBM7DF-CEAA30 cable is a standard non-flex cable and it has an operational bend radius of 10 times the cable diameter. In comparison, the flex cables have an operational bend radius of 12 times the cable diameter. There are less cables such as the 2090-CFBM7DF-CEAA30 cable which have a CE designation than there are feedback cables with the CD designation.

The 2090-CFBM7DF-CEAA30 cable is compatible with a wide range of motors and actuators, including those with the following catalog numbers: VPC-Bxxxxx-Y, VPC-Bxxxxx-S, VPC-B3004x-M, MPL-A/B15xxx and MPL-A/B2xxx, MPL-A/B3xxx, MPL-A/B4xxx, MPL-A/B45xxx, MPL-A/B5xxx, MPL-B6xxx, MPL-B8xxx, and MPL-B9xxx, MPM-A/Bxxxx, MPF-A/Bxxxx, RDB-Bxxxx, LDAT-Sxxxxxx-xDx and LDAT-Sxxxxxx-xBx, MPAS-A/Bxxxx and MPMA-A/Bxxxx, MPAR-A/Bxxxxx, MPAI-A/Bxxxxx, LDC-Cxxxxxxx and LDL-xxxxxxx and HPK-B/Exxxxx. The wire size for all the conductors on the 2090-CFBM7DF-CEAA30 cable is 22 AWG. The weight of the cable is 0.136 kilograms per meter or approximately 4.08 kilograms. The diameter of the 2090-CFBM7DF-CEAA30 cable is 9.8 millimeters and the total length of the SpeedTec DIN connector which connects to one end of the cable is 147 millimeters. The 2090-CFBM7DF-CEAA30 cable is compatible with a bulkhead adapter with the catalog number 2090-KPB47-12CF which has a diameter of 28 millimeters. The low-profile connector kits compatible with the 2090-CFBM7DF-CEAA30 cable include the 2090-K2CK-D15M, 2090-K6CL-D15M, and the 2090-K2CK-COMBO kit. The 2090-CFBM7DF-CEAA30 cable requires a breakout component for drive end termination.