Speak with a real person who will go out of the way to help!
The picture shown is for representative purposes only. The actual product delivered corresponds to the part number you ordered.
- 1305BA04AHA1
- DISCONTINUED BY MANUFACTURER
- AC DRIVE
- 1305 SERIES
- 3 PHASE
- 380-460 VAC
- 50/60 HZ
- 1.5 KW (2 HP)
- 4 AMPS
- IP 30 (NEMA TYPE 1)
- HIM WITH ANALOG SPEED POT
- FACTORY WARRANTY DOES NOT APPLY. TEXNITE 1-YEAR WARRANTY INCLUDED
Texnite is not an authorized distributor, reseller, or representative of the products displayed or mentioned on this website. All product names, trademarks, brands, and logos used or referred to on this site remain the property of their respective owners. The depiction, description, or sale of products showcasing these names, trademarks, brands, and logos is solely for identification purposes and does not imply or intend to indicate any affiliation with or authorization by any rights holder.
Product is surplus. Manufacturer's warranties do NOT apply.
Allen Bradley 1305-BA04A-HA1
Allen Bradley- 1305BA04AHA1
- DISCONTINUED BY MANUFACTURER
- AC DRIVE
- 1305 SERIES
- 3 PHASE
- 380-460 VAC
- 50/60 HZ
- 1.5 KW (2 HP)
- 4 AMPS
- IP 30 (NEMA TYPE 1)
- HIM WITH ANALOG SPEED POT
- FACTORY WARRANTY DOES NOT APPLY. TEXNITE 1-YEAR WARRANTY INCLUDED
QUICK DELIVERY
FREE SHIPPING
1 YEAR WARRANTY
EASY RETURNS
Technical Specifications for 1305-BA04A-HA1
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1305-BA04A-HA1 |
Product Line | 1305 AC Drives |
Enclosure Type | IP 30 (NEMA Type 1) |
Voltage | 380-460V, Three Phase |
Human Interface Modules | HIM with Analog Speed Pot |
Language | English |
Horsepower | 2 HP |
Motor Rating (kW, Output Current) | 1.5 kW 4 A |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1305-BA04A-HA1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-BA04A-HA1 units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1305-BA04A-HA1 |
Product Line | 1305 AC Drives |
Enclosure Type | IP 30 (NEMA Type 1) |
Voltage | 380-460V, Three Phase |
Human Interface Modules | HIM with Analog Speed Pot |
Language | English |
Horsepower | 2 HP |
Motor Rating (kW, Output Current) | 1.5 kW 4 A |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1305-BA04A-HA1 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-BA04A-HA1 units instead of migration.
sAbout 1305-BA04A-HA1
The Allen-Bradley 1305-BA04A-HA1 is a variable speed drive in the Bulletin AC drive series. It has a 3-phase motor rating of 1.5kW or 2HP and an output current of 4mA. The output voltage can be adjusted from 0V to any desired input voltage. The output frequency is programmable to values between 0 and 400Hz. The overall ScanPort load is 250mA at highest. It has a speed controller for the 3-phase AC induction motor with an input voltage rating of 380-460V and a frequency rating of 50-60Hz. The 1305-BA04A-HA1 is operational between 340 and 500V and 47 and 63Hz. The input kVA has a value of 3.1. The power factor or displacement is 0.8 (lagging) with an efficiency rating of 97.5%. The power dissipation for this type is 52W.
As indicated in the catalog number, the enclosure used for the 1305-BA04A-HA1 is an IP30 (NEMA 1) standard type. The control input type for this device is a contact closure with an internal 5V supply. Grounding or applying external voltage causes damage to the device. The Start, Stop, and Forward/Reverse Control Input is configurable for 2 or 3-wire control. Use SW1, SW2, and SW3 for configuring the control of the 7 preset speeds and the 2 acceleration/deceleration times. To enable drive operation, use the interlock input. The external speed potentiometer has a value of 10KΩ or 1 watt. The analog input for 4-20mA has an input impedance of 250Ω non-isolated for 0-10V and it has an input impedance of 100KΩ non-isolated.
The control output for Programmable Output 1 is a relay contact form and it has a resistive rating of 155V AC/30V DC and an inductive rating of 115V AC/30V DC, 2A. Programmable Output 2 for the open collector (sink) has values of 24V DC, 20%, 50mA maximum. The Analog Output ranges from 0-10V DC and its 4,000 Ohms, and the 8-bit resolution is less than or equal to the load impedance. The PWM algorithm is a sine-weighted PWM output. The V/Hz has a programmable function. The AC Dynamic Braking Torque is it valued at 150% with an external resistor and only 50% without one. As indicated in the catalog number, the Human Interface Module (HIM) used for the 1305-BA04A-HA1 is an analog speed potentiometer type of HIM.
From the net to the phone call, everyone was eager to help! They knew what they were talking about, and delivered what they promised! Doesn't get much better than that!
Thank you!
Robert Hughbanks
Gear Specialist
Gexpro
No problems at all, order was placed well after lunch time and it dispatched the same day
Sandy Leonard
Sales
International Transmission & Bearings
Very easy to place order
Lynn Crandall
Office Manager
Smith Control Systems Inc
Pricing can be high, but understandable for materials that will not have new production for months.
Andrew Macek
Buyer
Durr Systems
Response time is quick, good customer service. Nothing to complain about.
Francois Vermeulen
Project director
Dematic
Great service.
Mike Jagemann
Executive VP
Jagemann Plating Company
The Part I received was not going to work for what I needed but, this is about how easy it was to return for a full refund!
Cole
Maintenance
Hartung Glass
Very good service follows up on quotes and orders!
Max Flores
Inside Sales
Desert Hills Eelectric Supply Inc
Michael Wilde
Sr. Maintenance Manager
BIMBO BAKERIES USA INC.
was easy and fast and information of product made it easy to verify
Jeff Wirchball
Maintenance Supervisor
Steelworks Of The Carolinas
Maliha was wonderful. She got everything right the first try, formalized the quote and emailed it to me. The heavy lifting was done. I took care of ordering, address payment etc. Your website/portal was unusually easy to navigate (even by me).
Great experience from soup to nuts.
Alan Youngberg
Managing Partner
Premier LInen
Texnite provided a power supply module which saved our NYC power plant customer from an emergency outage. We placed our order late in the afternoon. Even though it was well past their same day shipping cutoff time, Texnite still made an extra effort to ship our order immediately and the module arrived before 8am the following morning.
Henry Zeylikovich
Manager
Sur-Seal
easy to order online. would order again..
John Ferraiolo
Treasurer
Ferraiolo Construction
The quote response was prompt. The "checkout" link in the email was very convenient.
Chris F
Shop Manager
Ponderosa Avionics, LLC
Item was as advertised and arrived in a concisely packaged and timely way
Dale Patuszynski
Purchasing Manager
Scientific Device Laboratory
With the current decline or non-existent customer service in the United States, it's great to deal with a company that does what it says it's going to do.
Russell
VP of Operations
Frey Ranch Distillery
Their response is quick.
Yurika Jamison
Puchasing Coordinator
Sumitomo Electric USA Holdings, Inc
prompt response in quote and gives best price & discount. Can ship immediately
Promise Mae Ibabao
Quality & Documentation Specialist/Purchasing
Summon Electronics Inc