Speak with a real person who will go out of the way to help!
The picture shown is for representative purposes only. The actual product delivered corresponds to the part number you ordered.
- 1305BA04AHAP
- DISCONTINUED BY MANUFACTURER
- AC DRIVE
- 1305 SERIES
- 3 PHASE
- 380-460 VAC
- 50/60 HZ
- 1.5 KW (2 HP)
- 4 AMPS
- IP 30 (NEMA TYPE 1)
- HIM WITH PROGRAMMER ONLY
- FACTORY WARRANTY DOES NOT APPLY. TEXNITE 1-YEAR WARRANTY INCLUDED
Texnite is not an authorized distributor, reseller, or representative of the products displayed or mentioned on this website. All product names, trademarks, brands, and logos used or referred to on this site remain the property of their respective owners. The depiction, description, or sale of products showcasing these names, trademarks, brands, and logos is solely for identification purposes and does not imply or intend to indicate any affiliation with or authorization by any rights holder.
Product is surplus. Manufacturer's warranties do NOT apply.
Allen Bradley 1305-BA04A-HAP Used Surplus
Allen Bradley- 1305BA04AHAP
- DISCONTINUED BY MANUFACTURER
- AC DRIVE
- 1305 SERIES
- 3 PHASE
- 380-460 VAC
- 50/60 HZ
- 1.5 KW (2 HP)
- 4 AMPS
- IP 30 (NEMA TYPE 1)
- HIM WITH PROGRAMMER ONLY
- FACTORY WARRANTY DOES NOT APPLY. TEXNITE 1-YEAR WARRANTY INCLUDED
QUICK DELIVERY
FREE SHIPPING
1 YEAR WARRANTY
EASY RETURNS
Reviews
Technical Specifications for 1305-BA04A-HAP
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1305-BA04A-HAP |
Product Line | 1305 AC Drives |
Enclosure Type | IP 30 (NEMA Type 1) |
Voltage | 380-460V, Three Phase |
Human Interface Modules | Programmer Only |
Language | English |
Horsepower | 2 HP |
Motor Rating (kW, Output Current) | 1.5 kW 4 A |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1305-BA04A-HAP has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-BA04A-HAP units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1305-BA04A-HAP |
Product Line | 1305 AC Drives |
Enclosure Type | IP 30 (NEMA Type 1) |
Voltage | 380-460V, Three Phase |
Human Interface Modules | Programmer Only |
Language | English |
Horsepower | 2 HP |
Motor Rating (kW, Output Current) | 1.5 kW 4 A |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1305-BA04A-HAP has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1305-BA04A-HAP units instead of migration.
sAbout 1305-BA04A-HAP
The Allen-Bradley 1305-BA04A-HAP is a member of the Bulletin 1305 AC drive series. This type of drive has a Human Interface Module (HIM) programmer-only function which provides programming functionality from the local panel. It has a nominal current rating of A04. The HIM is an immediate controller for parameter adjustment. The 1305-BA04A-HAP has an input voltage of 380-460V AC with a 3-phase input of 1.5kW (2HP) for its motor rating and an output current of 4A. The operating voltage range is between 340 and 500V AC. It has a 52W of power dissipation. The AC dynamic braking torque has an output of 50% without an external resistor and it has an output of 150% if an external resistor is included. It has a 97.5% efficiency rating and a displacement of 0.8 (lagging) and with 21W power dissipation. The Allen-Bradley 1305-BA01A has an IP30 (NEMA 1) enclosure type and a natural convection for its cooling method. It can operate at a 1G vibration and a 0-50° C ambient temperature. It can be stored at a temperature between -40 and 70° C.
The Allen-Bradley 1305-BA04A-HAP uses a contact closure or an internal 5V supply for its control input type. It is strictly prohibited to ground or apply an external voltage when working with the device. The control input for the start, stop, forward, or reverse functions is configurable for 2 or 3-wire controls. The jog control input is for momentary (non-maintained) input. The SW1, SW2, and SW3 are configurable inputs for controlling 7 preset speeds and 2 acceleration/deceleration times. The 1305-BA04A-HAP has an interlock input function to enable operation. The external speed of the potentiometer is 10KΩ, 1 watt. It has a non-isolated analog input impedance of 250 ohms with a 10-bit resolution for every 4-20mA and a 0-10V DC analog input impedance of 100K Ω (non-isolated) with a 10-bit resolution. The approximate dimensions for this device are 170mm x 95mm x 184.1mm for the depth. The 1305-BA04A-HAP weighs approximately 3.6kg or 8 lb.
Technical Description of 1305-BA04A-HAP
From the net to the phone call, everyone was eager to help! They knew what they were talking about, and delivered what they promised! Doesn't get much better than that!
Thank you!
Robert Hughbanks
Gear Specialist
Gexpro
No problems at all, order was placed well after lunch time and it dispatched the same day
Sandy Leonard
Sales
International Transmission & Bearings
Very easy to place order
Lynn Crandall
Office Manager
Smith Control Systems Inc
Pricing can be high, but understandable for materials that will not have new production for months.
Andrew Macek
Buyer
Durr Systems
Response time is quick, good customer service. Nothing to complain about.
Francois Vermeulen
Project director
Dematic
Great service.
Mike Jagemann
Executive VP
Jagemann Plating Company
The Part I received was not going to work for what I needed but, this is about how easy it was to return for a full refund!
Cole
Maintenance
Hartung Glass
Very good service follows up on quotes and orders!
Max Flores
Inside Sales
Desert Hills Eelectric Supply Inc
Michael Wilde
Sr. Maintenance Manager
BIMBO BAKERIES USA INC.
was easy and fast and information of product made it easy to verify
Jeff Wirchball
Maintenance Supervisor
Steelworks Of The Carolinas
Maliha was wonderful. She got everything right the first try, formalized the quote and emailed it to me. The heavy lifting was done. I took care of ordering, address payment etc. Your website/portal was unusually easy to navigate (even by me).
Great experience from soup to nuts.
Alan Youngberg
Managing Partner
Premier LInen
Texnite provided a power supply module which saved our NYC power plant customer from an emergency outage. We placed our order late in the afternoon. Even though it was well past their same day shipping cutoff time, Texnite still made an extra effort to ship our order immediately and the module arrived before 8am the following morning.
Henry Zeylikovich
Manager
Sur-Seal
easy to order online. would order again..
John Ferraiolo
Treasurer
Ferraiolo Construction
The quote response was prompt. The "checkout" link in the email was very convenient.
Chris F
Shop Manager
Ponderosa Avionics, LLC
Item was as advertised and arrived in a concisely packaged and timely way
Dale Patuszynski
Purchasing Manager
Scientific Device Laboratory
With the current decline or non-existent customer service in the United States, it's great to deal with a company that does what it says it's going to do.
Russell
VP of Operations
Frey Ranch Distillery
Their response is quick.
Yurika Jamison
Puchasing Coordinator
Sumitomo Electric USA Holdings, Inc
prompt response in quote and gives best price & discount. Can ship immediately
Promise Mae Ibabao
Quality & Documentation Specialist/Purchasing
Summon Electronics Inc