Allen Bradley 2090-XXNPMP-16S60

The Allen-Bradley 2090-XXNPMP-16S60 cable is a power cable for the MP series and 1326AB series motors. It has a length of 60 meters and a wire size of 16 AWG. The color of the cable is black. The 2090-XXNPMP-16S60 cable is a non-flex cable. The 2090-XXNPMP-16S60 cable is part of the Bulletin 2090 series motor power and feedback transition cables. These transition cables are used in installations where Kinetix MP motors with bayonet connectors have been replaced with motors with circular DIN connectors. The motor end connector on the 2090-XXNPMP-16S60 cable is a bayonet connector and the drive end has flying leads. The cable has an industrial grade thermoplastic elastomer jacket. The 2090-XXNPMP-16S60 cable is a shielded cable and it has 4 conductors and it is used for 3-phase power.

The 2090-XXNPMP-16S60 cable is shipped in a coil. The cable will retain the coil shape unless it is straightened. A long cable such as the 2090-XXNPMP-16S60 cable can be straightened by laying it on the floor in a straight line. Any coiling present in the cable should relax within one day if it is stretched out. In contrast, a short cable can be straightened by hanging it from its mid-point. Once a cable is straightened, then it becomes easier to install. The 2090-XXNPMP-16S60 cable is a shielded cable and it should be grounded at a minimum of one point to avoid electric shock. The servo drive to which the 2090-XXNPMP-16S60 cable connects must be powered off before the cable is connected or disconnected. If this precaution is not followed, then arcing can occur. Another possibility is that unexpected motion can occur. Both of these things can lead to user injury or equipment damage.