Allen Bradley 20-750-BNETIP

The Allen-Bradley 20-750-BNETIP module is a BACnet/IP option module for Allen-Bradley PowerFlex 750 series drives. The module is compatible with all Allen-Bradley PowerFlex 753 and PowerFlex 755 drives. The module is certified by the CE, C-Tick, UL, and BTL standards. The 20-750-BNETIP module supports the BACnet/IP protocol at 10 and 100 Mbps data rates. The media device supported by the module is an Ethernet cable with an RJ 45 connector. The 20-750-BNETIP module communicates with the drive on which it is installed through the DPI protocol at a rate of 500 kbps. The electrical power specifications for the module are 250 milliamps at 14 Volts DC. The module dimensions are 16 x 130 x 83 millimeters and its approximate weight is 60 grams. The working and storage temperature ranges are -5 to 65 degrees Celsius and -40 to 85 degrees Celsius, respectively. The relative working and storage humidity ranges are 5 to 80% and 5 to 95%, respectively. During both operation and storage, the module must be protected from corrosive elements.

The 3 status indicators that are provided on the Allen-Bradley 20-750-BNETIP module are for displaying the status of option module and network communication. The IP address is selected by making the appropriate settings on the jumper provided on the module for this purpose. The power should be removed from the PowerFlex 750 drive before the 20-750-BNETIP module is installed or removed. Static control precautions should also be followed to prevent electrostatic discharge which could cause injury or damage. Only experienced and trained technicians should be involved in the module’s installation and troubleshooting processes.