Allen Bradley 1336E-BRF100-AA-EN-HA2-L9E

The Allen-Bradley/Rockwell Automation 1336E-BRF100-AA-EN-HA2-L9E drive has been specially designed to operate in applications with motors. The most common motors used with this kind of drive are pumps and fans. This drive can not only control motor speed and torque but provide a safety level to operations where both a motor and a drive are used. This level of safety comes from the fact that operations with sudden changes of speed are changed into operations with smoother changes of speed which will improve the operating process and extend the lifespan of all the equipment involved. The Allen-Bradley 1336E-BRF100-AA-EN-HA2-L9E drive operates with a Horsepower rating of 10 Horsepower and an AC voltage range of 380 to 480 Volts AC. This voltage can also be switched to a DC voltage range which is 513 to 620 Volts DC.

The Allen-Bradley/Rockwell Automation 1336E-BRF100-AA-EN-HA2-L9E drive comes with an open enclosure that enables the drive to withstand an ambient temperature of 0 to 50 degrees Celsius. This drive can be installed only in indoor environments with sufficient ventilation. Overheating from poor ventilation can significantly decrease the life of the drive and interfere with the productivity of it in applications. Overheating can also shut down the drive suddenly, which leads to unsafe operations that are detrimental not only the drive but to the rest of the equipment around it. In order to avoid overheating, the drive must be mounted with clearances of at least 6 inches on each side, and air conditioners must be installed for additional cooling if the clearances are not enough.