Allen Bradley 1336-BDB-SP52D

The 1336-BDB-SP52D is a PCB Gate Drive Board manufactured by Allen-Bradley. The Allen-Bradley 1336-BDB-SP52D Gate Drive Board is part of 1336 Spare Parts PCB Gate Drive Board Series. The Allen-Bradley 1336-BDB-SP52D Gate Drive Board features 575 Volts AC, 500 Horsepower output and a plug-in option card that is the L option which provides control inputs to the Allen-Bradley 1336-BDB-SP52D Gate Drive Board. The Allen-Bradley 1336-BDB-SP52D Gate Drive Board can be configured to use an analog speed follower or preset speed module. Also, the Allen-Bradley 1336-BDB-SP52D Gate Drive Board can be controlled by using a communication network. The Allen-Bradley 1336-BDB-SP52D Gate Drive Board two-wire control is a run forward/run reverse mechanism.

A ground fault occurs typically when the Allen-Bradley 1336-BDB-SP52D Gate Drive Board input ground current exceeds the threshold set in Ground Fault Level on Port 11 for five-line cycles. The Allen-Bradley 1336-BDB-SP52D Gate Drive Board interface board is jumper-selectable to accept a 5V TTL or 12 Volts DC square-wave with a minimum high-state voltage of 3.0 Volts DC (TTL) or 7.0 Volts DC (12-volt encoder). To prevent the Allen-Bradley 1336-BDB-SP52D Gate Drive Board damage, the users should not exceed the Allen-Bradley 1336-BDB-SP52D Gate Drive Board’s stated voltage. When the Allen-Bradley 1336-BDB-SP52D Gate Drive Board user utilizes encoder connections or communications cables, the wiring should be separated from the power cabling by separating the wiring/cabling and by using carefully routed and shielded cable or a separate steel conduit.