Allen Bradley 1326AB-B720E-M2K7LS Used Surplus

The Allen-Bradley 1326AB-B720E-M2K7LS Torque Plus AC Servo Motor is a high-performance servo motor from the 1326AB motor series that is designed to meet the needs of high-performance motion control systems. The 1326AB-B720E-M2K7LS Servo Motor comes with an integral Normally Closed (N.C.) thermal switch that detects thermal overload, and it has a special permanent magnet rotor that offers low-cost, improved servo response. The 1326AB-B720E-M2K7LS Servo Motor has a 3-phase 460 Volts AC voltage rating and an acceptable input range between 380 Volts AC and 460 Volts AC. It has an output rating of 6.8 Kilowatts and a continuous torque rating of 273 pounds on an inch. The 1326AB-B720E-M2K7LS Servo Motor also has a peak torque rating of 780 pounds on an inch and a maximum motor speed of 3000 Revolutions Per Minute (RPM).

The 1326AB-B720E-M2K7LS Servo Motor has a built-in multi-turn high-resolution encoder that provides absolute position feedback with the use of a battery and a 24 Volts DC holding brake (spring-set) with a 45.2 Newton-meter holding brake torque. It has a maximum frame size of 150 millimeters and 20 millimeters approximate stack length. The 1326AB-B720E-M2K7LS Servo Motor has an integral shaft oil seal, which confers dust-tight protection, and it requires no additional shaft-seal kit. It has a standard IP 67 ingress protection rating and a TENV design. The 1326AB-B720E-M2K7LS Servo Motor comes with sealed feedback and power connector cables, and it supports the shaft exit connector type. The 1326AB-B720E-M2K7LS Servo Motor weighs approximately 46.3 Kilograms, and it has a factory rated operating temperature range of 0 to 40 degrees Celsius. The 1326AB-B720E-M2K7LS Servo Motor is designed for 5 to 95% non-condensing relative humidity, and it is designed to withstand 10 g peak shock for 6 milliseconds duration.