Allen Bradley 1326AB-B515G-21-L

The 1326AB-B515G-21-L servo motor is a 3-phase, brushless AC synchronous servo motor from Allen-Bradley/Rockwell Automation. The 1326AB-B515G-21-L servo motor belongs to the 1326AB series of servo motors from Allen-Bradley. Motors in this series have common characteristics such as a permanent magnet rotor for increased servo response, 100% continuous rated torque at 0 revolutions per minute, and up to 0.0005 inches of total peak displacement. Also, the 1326AB-B515G-21-L servo motor, like other motors in the same series, has a 3-phase sinusoidal wound stator field for direct transfer of heat to the surrounding environment which consequently enables smooth operation even at low speeds.

The 1326AB-B515G-21-L servo motor can be mounted with its shaft facing up or down. When the servo motor incorporates a shaft seal, it has an international protection rating of IP 65. With an IP 65 environmental protection rating, the motor can withstand harsh industrial conditions. Some of these conditions include, but are not limited to, protection against dust and water jets. The motor features a normally closed thermal switch in the motor winding rated at 115 Volts AC and 24 Volts DC at a current rating of 1 Amp. The 1326AB-B515G-21-L servo motor uses insulation that is recognized by the Underwriters Laboratories and it features standard MIL connectors. The 1326AB-B515G-21-L servo motor uses environmentally sealed power and feedback cable packages. Note that the feedback and power cables are available in flexible standard lengths, multi-flexible (track) lengths, and in extended lengths. The servo motors in the 1326AB series like the 1326AB-B515G-21-L servo motor use the TENV construction.