Allen Bradley 1326AB-B420H-S2K4L

The 1326AB-B420H-S2K4L servo motor is a stainless-steel servo motor. It is a solid-state device designed and manufactured by Allen-Bradley. It is an AC servo motor meant for factory use only. It is small in size with a frame diameter of 149 millimeters. It comes with 4 magnetic stacks. The magnetic stacks help increase the adhesive force of the magnet and offer maximum performance. The servo motor takes in 460 Volts AC voltage as input and it has an operating speed of 6000 RPM for a normal load. It has a rated torque of 5.1 N-m. The 1326AB-B420H-S2K4L servo motor can add a shaft seal to increase the water-resistant ability of the servo motor. The shaft seal adds an IP 67 water-resistant protection rating to the servo motor. An 8.1 N-m holding brake with a 24 Volts DC coil is present in this servo motor as a braking device.

The 1326AB-B420H-S2K4L servo motor comes with an insulation dielectric made up of Mylar Nomex which can withstand 1500 Volts AC RMS with a frequency of 50/60 Hertz for a time period of 60 seconds. The servo motor has a rated peak torque of 44 N-m. The rotor moment of inertia of this servo motor variant is 0.0008. The operating temperature of the 1326AB-B420H-S2K4L lies between 0 and 40 degrees Celsius and it can be stored between -30 and 50 degrees Celsius when not in use. The installation environment should be properly ventilated and the relative humidity should be maintained at a level between 5 and 95%, non-condensing. The servo motor is fully compatible with the 1394 Allen-Bradley motion control system.