Speak with a real person who will go out of the way to help!
The picture shown is for representative purposes only. The actual product delivered corresponds to the part number you ordered.
- 1326CPB1060
- DISCONTINUED BY MANUFACTURER 2005-06-17
- CABLE
- ASSEMBLY
- 60M
- FOR 4/48 FRAME
- FACTORY WARRANTY DOES NOT APPLY. TEXNITE 1-YEAR WARRANTY INCLUDED
Texnite is not an authorized distributor, reseller, or representative of the products displayed or mentioned on this website. All product names, trademarks, brands, and logos used or referred to on this site remain the property of their respective owners. The depiction, description, or sale of products showcasing these names, trademarks, brands, and logos is solely for identification purposes and does not imply or intend to indicate any affiliation with or authorization by any rights holder.
Product is surplus. Manufacturer's warranties do NOT apply.
Allen Bradley 1326-CPB1-060
Allen Bradley- 1326CPB1060
- DISCONTINUED BY MANUFACTURER 2005-06-17
- CABLE
- ASSEMBLY
- 60M
- FOR 4/48 FRAME
- FACTORY WARRANTY DOES NOT APPLY. TEXNITE 1-YEAR WARRANTY INCLUDED
QUICK DELIVERY
FREE SHIPPING
1 YEAR WARRANTY
EASY RETURNS
Technical Specifications for 1326-CPB1-060
Brand | Allen-Bradley / Rockwell Automation |
Series | 1326 Motors |
Part Number | 1326-CPB1-060 |
Description | Power Cable |
Voltage | 460 Volts AC |
Application | Standard |
Shielding | Braided Shield Wire |
Quantity | 1 |
Connection Type | Local or Remote In-line Connection |
Ingress Rating | IP65 |
Cable Length | 60 Meters |
Bend Radius | 76.2 millimeters |
Number of Wires | 10 |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1326-CPB1-060 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326-CPB1-060 units instead of migration.
Brand | Allen-Bradley / Rockwell Automation |
Series | 1326 Motors |
Part Number | 1326-CPB1-060 |
Description | Power Cable |
Voltage | 460 Volts AC |
Application | Standard |
Shielding | Braided Shield Wire |
Quantity | 1 |
Connection Type | Local or Remote In-line Connection |
Ingress Rating | IP65 |
Cable Length | 60 Meters |
Bend Radius | 76.2 millimeters |
Number of Wires | 10 |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1326-CPB1-060 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326-CPB1-060 units instead of migration.
sAbout 1326-CPB1-060
The Allen-Bradley 1326-CPB1-060 Series B servo motor power cable is a power cable for the 1326 servo motors and the 1394 motion control system. This cable is UL listed for all standard industrial applications, and it is designed to provide cabling solutions for standard applications. The 1326-CPB1-060 cable features a braided wire shield that provides superior levels of immunity to electromagnetic interference, and it supports the 1326 push/pull motor connector-end for simplified installation and maintenance. The 1326-CPB1-060 cable is compatible with the 1326AB-B5xx and 1326AB-B4xx servo motors, and it can also be used with the 1391B-ES or 1391-DES families of drives. The 1326-CPB1-060 cable has a total length of 15 meters, and a maximum bend radius of 76.2 millimeters. This cable has a maximum diameter of 14 millimeters and an average connector diameter of 43.2 millimeters.
The 1326-CPB1-030 cable comes as a single-standard power cable with a sealed IP 65 enclosure rating that offers dust-free and water-tight protection in a harsh industrial environment. It offers a CE-compliant in-line connection solution within a cabinet wall, and it also supports a quick and low-cost cable solution outside of the cabinet wall. The 1326-CPB1-060 cable is a 10-wire designed power cable (2 brake wires, 3 power wires, 2 thermostat wires, 1 GND wire, and a shield ground wire) that comes in a cable assembly package. Each cable assembly package consists of a standard power cable and some installation accessories that include contact pins, an insulation body, a connector housing, and an installation manual. It is recommended to hang the cable vertically for 24 hours before installation to prevent internal cable twists and to relax the cable conductors.
Technical Description of 1326-CPB1-060
The Allen-Bradley 1326-CPB1-060 cable is a single-standard power cable assembly that is used with the Bulletin 1326 series 460 Volts AC rated servo motors and the 1394 motion control system. It has a minimum bend radius of 76.2 millimeters, and a total cable length of 60 meters.
From the net to the phone call, everyone was eager to help! They knew what they were talking about, and delivered what they promised! Doesn't get much better than that!
Thank you!
Robert Hughbanks
Gear Specialist
Gexpro
No problems at all, order was placed well after lunch time and it dispatched the same day
Sandy Leonard
Sales
International Transmission & Bearings
Very easy to place order
Lynn Crandall
Office Manager
Smith Control Systems Inc
Pricing can be high, but understandable for materials that will not have new production for months.
Andrew Macek
Buyer
Durr Systems
Response time is quick, good customer service. Nothing to complain about.
Francois Vermeulen
Project director
Dematic
Great service.
Mike Jagemann
Executive VP
Jagemann Plating Company
The Part I received was not going to work for what I needed but, this is about how easy it was to return for a full refund!
Cole
Maintenance
Hartung Glass
Very good service follows up on quotes and orders!
Max Flores
Inside Sales
Desert Hills Eelectric Supply Inc
Michael Wilde
Sr. Maintenance Manager
BIMBO BAKERIES USA INC.
was easy and fast and information of product made it easy to verify
Jeff Wirchball
Maintenance Supervisor
Steelworks Of The Carolinas
Maliha was wonderful. She got everything right the first try, formalized the quote and emailed it to me. The heavy lifting was done. I took care of ordering, address payment etc. Your website/portal was unusually easy to navigate (even by me).
Great experience from soup to nuts.
Alan Youngberg
Managing Partner
Premier LInen
Texnite provided a power supply module which saved our NYC power plant customer from an emergency outage. We placed our order late in the afternoon. Even though it was well past their same day shipping cutoff time, Texnite still made an extra effort to ship our order immediately and the module arrived before 8am the following morning.
Henry Zeylikovich
Manager
Sur-Seal
easy to order online. would order again..
John Ferraiolo
Treasurer
Ferraiolo Construction
The quote response was prompt. The "checkout" link in the email was very convenient.
Chris F
Shop Manager
Ponderosa Avionics, LLC
Item was as advertised and arrived in a concisely packaged and timely way
Dale Patuszynski
Purchasing Manager
Scientific Device Laboratory
With the current decline or non-existent customer service in the United States, it's great to deal with a company that does what it says it's going to do.
Russell
VP of Operations
Frey Ranch Distillery
Their response is quick.
Yurika Jamison
Puchasing Coordinator
Sumitomo Electric USA Holdings, Inc
prompt response in quote and gives best price & discount. Can ship immediately
Promise Mae Ibabao
Quality & Documentation Specialist/Purchasing
Summon Electronics Inc