Allen Bradley 2090-XXNPMF-14S30

The 2090-XXNPMF-14S30 cable is a DIN M23 Type 4 power cable connector by Allen-Bradley. It is a standard non-flex power cable for the MP series motors and the 1326 AB servo motors. It is equipped with a conductor size of 30 AWG and it is 30 meters in length. The outer layer of the cable is black in color and it is made up of industrial TPE material. It can serve a voltage supply of up to 600 Volts easily. The cable has been registered with the UL standards for the AWM requirements. The 2090-XXNPMF-14S30 cable has a M23 DIN connector on the motor end while the drive end has a flying lead connector. This Series A cable has a power rating of 8 Watts. The cable comes with a straight motor connector and it weighs 0.276 kilograms. The cable has 4 shielded conductors for the motor brakes.

The 2090-XXNPMF-14S30 cable is an industrial shielded cable for a 3-phase power supply. The cable is installed between the motor and the drive. During the installation process, the cable should not bear any force in the areas where it is bent. The DIN connector end is 2.9 inches and the cable is 3.8 inches from the connector to the bending point. The cable shield id 5.9 inches in length. The 2090-XXNPMF-14S30 cable has a low capacitance design which helps to increase the system power density. The cable comes with a DESINA-compliant jacket for the easy identification and separation of the cables in the system. The cable is resistant to direct sunlight and moderate amounts of oil, which makes it suitable for harsh industrial conditions. It also comes with a FT4 flame resistance rating.