Speak with a real person who will go out of the way to help!
The picture shown is for representative purposes only. The actual product delivered corresponds to the part number you ordered.
Revisions: Ser A
Description: The Allen-Bradley 20-750-ENETR is a PowerFlex 750 Dual Port Ethernet /IP Option module. This module has Two (2) Ethernet I/P ports, supporting 10 Mbps Full-duplex, 10 Mbps Half-duplex, 100 Mbps Full-duplex, or 100 Mbps Half-duplex communication rate. This module is capable of operating Tap or Adapter mode.
Texnite is not an authorized distributor, reseller, or representative of the products displayed or mentioned on this website. All product names, trademarks, brands, and logos used or referred to on this site remain the property of their respective owners. The depiction, description, or sale of products showcasing these names, trademarks, brands, and logos is solely for identification purposes and does not imply or intend to indicate any affiliation with or authorization by any rights holder.
Texnite is NOT an authorized distributor, affiliate or representative for the Manufacturer.
Product is surplus. Manufacturer's warranties do NOT apply.
Product is surplus. Manufacturer's warranties do NOT apply.
Allen Bradley 20-750-ENETR Used Surplus
Allen Bradley
Revisions: Ser A
Description: The Allen-Bradley 20-750-ENETR is a PowerFlex 750 Dual Port Ethernet /IP Option module. This module has Two (2) Ethernet I/P ports, supporting 10 Mbps Full-duplex, 10 Mbps Half-duplex, 100 Mbps Full-duplex, or 100 Mbps Half-duplex communication rate. This module is capable of operating Tap or Adapter mode.
QUICK DELIVERY
FREE SHIPPING
1 YEAR WARRANTY
EASY RETURNS
20-750-ENETR
Description: PowerFlex AC Drive User Installed Options, Spare Parts and Demo Units
Communications Kits
PF750 Dual-port EtherNet/IP Module
PF750 Dual-port EtherNet/IP Module
The product offered is sold as used surplus. Texnite is not an authorized surplus dealer or affiliate of the Manufacturer associated with this product. It's possible that the product may contain older date codes or belong to an earlier series compared to items available directly from the factory or authorized dealers. As Texnite is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply.
Although numerous Allen-Bradley PLC products may contain pre-installed firmware, Texnite does not confirm whether a PLC product has firmware or if the firmware corresponds to the revision level required for your specific application. Additionally, Texnite does not guarantee or imply your capability or entitlement to download or acquire firmware for the product from Rockwell, its distributors, or any other source. Furthermore, Texnite does not assert your right to install any such firmware on the product. Texnite neither obtains nor provides firmware on behalf of customers. It remains your responsibility to adhere to the terms stated in any End-User License Agreement or a similar document related to obtaining or installing firmware.
Technical Specifications for 20-750-ENETR
| Product Type | Dual-port EtherNet/IP Option Module |
| Relative Humidity: | 5…95% noncondensing |
| Storage Temperature: | -40…+85 °C (-40…+185 °F) |
| Operating Temperature: | -10…+50 °C (14…122 °F) |
| Communication rate: | 10 Mbps Full-duplex, 10 Mbps Half-duplex, 100 Mbps Full-duplex, or 100 Mbps Half-duplex |
| Supported Protocol: | Ethernet I/P |
| Operating Modes: | Adapter mode and Tap mode |
| Weight | 62 g |
| Electrical Consumption | 250 mA @14V DC |
| Data Rate | 500 Kbps |
| Brand | Allen-Bradley |
| Part Number | 20-750-ENETR |
| Manufacturer | Rockwell Automation |
| Used with | Powerflex 755 |
| Drive Protocol | DPI |
| Network Protocol | 62 g |
| UPC | 884951290938 |
| Product Type | Dual-port EtherNet/IP Option Module |
| Relative Humidity: | 5…95% noncondensing |
| Storage Temperature: | -40…+85 °C (-40…+185 °F) |
| Operating Temperature: | -10…+50 °C (14…122 °F) |
| Communication rate: | 10 Mbps Full-duplex, 10 Mbps Half-duplex, 100 Mbps Full-duplex, or 100 Mbps Half-duplex |
| Supported Protocol: | Ethernet I/P |
| Operating Modes: | Adapter mode and Tap mode |
| Weight | 62 g |
| Electrical Consumption | 250 mA @14V DC |
| Data Rate | 500 Kbps |
| Brand | Allen-Bradley |
| Part Number | 20-750-ENETR |
| Manufacturer | Rockwell Automation |
| Used with | Powerflex 755 |
| Drive Protocol | DPI |
| Network Protocol | 62 g |
| UPC | 884951290938 |
About 20-750-ENETR
The 20-750-ENETR is A PowerFlex component. This module is a Dual Ethernet/IP option adapter that directly installs to the PowerFlex drive. It supports Adapter and Tap mode, both capable of 10 Mbps Full-duplex, 10 Mbps Half-duplex, 100 Mbps Full-duplex, or 100 Mbps Half Duplex communication rates.
Up to Thirty (30) Ethernet connections can be made with this option adapter module. Both modes support 16 simultaneous MSG instruction connections. In adapter mode, one exclusive owner I/O connection is included.
The 20-750-ENETR supports system protocol which is Drive DPI protocol with data rate of 500 Kbps. This adapter may be connected in a variety of topologies such as star, linear, or device-level ring (DLR) network topologies.
The 20-750-ENETR also supports Integrated motion over Ethernet for the PowerFlexDrive series and the option adapter is configured in Tap mode.
The 20-750-ENETR has embedded Electronic Data Sheets (EDS). This means, EDS files are automatically loaded and the option adapter module may be easily recognized in the Ethernet I/P network.
This option adapter module has embedded switches for setting the IP addresses. It is also compatible with the stand-alone tool BOOTP-DHCP. Status indicators are also provided for monitoring the module’s operation.
The 20-750-ENETR environmental specifications include an operating temperature of -10…+50 °C (14…122 °F). If this module is intended to serve as backup, thus a spare module, storage temperature requirement is -40…+85 °C (-40…+185 °F). Both environments shall have 5…95% noncondensing.
The Allen-Bradley 20-750-ENETR module and the entire series of PowerFlex 755 modules come preinstalled with predictive diagnostics and DeviceLogix control technology. Other features of these drives include an Ethernet port that is designed for communication. The PowerFlex 755 drives are designed to be used to control permanent magnet motors. However, they also require proper configuration so that they can offer adequate protection against operations that are not stable by using CM or Power jumpers to help select between solid and non-solid grounds. It has four status indicators which show the mode of operation and network communication.
The 20-750-ENETR module also has Node address switches that set the network node address of the option module. Additional features of the 20-750-ENETR module include an operating mode jumper that selects the mode of operation for the module as well as the ENET1 and ENET2 network ports which help with the transfer of data on the 100Base-TX Ethernet connections.
Up to Thirty (30) Ethernet connections can be made with this option adapter module. Both modes support 16 simultaneous MSG instruction connections. In adapter mode, one exclusive owner I/O connection is included.
The 20-750-ENETR supports system protocol which is Drive DPI protocol with data rate of 500 Kbps. This adapter may be connected in a variety of topologies such as star, linear, or device-level ring (DLR) network topologies.
The 20-750-ENETR also supports Integrated motion over Ethernet for the PowerFlexDrive series and the option adapter is configured in Tap mode.
The 20-750-ENETR has embedded Electronic Data Sheets (EDS). This means, EDS files are automatically loaded and the option adapter module may be easily recognized in the Ethernet I/P network.
This option adapter module has embedded switches for setting the IP addresses. It is also compatible with the stand-alone tool BOOTP-DHCP. Status indicators are also provided for monitoring the module’s operation.
The 20-750-ENETR environmental specifications include an operating temperature of -10…+50 °C (14…122 °F). If this module is intended to serve as backup, thus a spare module, storage temperature requirement is -40…+85 °C (-40…+185 °F). Both environments shall have 5…95% noncondensing.
The Allen-Bradley 20-750-ENETR module and the entire series of PowerFlex 755 modules come preinstalled with predictive diagnostics and DeviceLogix control technology. Other features of these drives include an Ethernet port that is designed for communication. The PowerFlex 755 drives are designed to be used to control permanent magnet motors. However, they also require proper configuration so that they can offer adequate protection against operations that are not stable by using CM or Power jumpers to help select between solid and non-solid grounds. It has four status indicators which show the mode of operation and network communication.
The 20-750-ENETR module also has Node address switches that set the network node address of the option module. Additional features of the 20-750-ENETR module include an operating mode jumper that selects the mode of operation for the module as well as the ENET1 and ENET2 network ports which help with the transfer of data on the 100Base-TX Ethernet connections.
From the net to the phone call, everyone was eager to help! They knew what they were talking about, and delivered what they promised! Doesn't get much better than that!
Thank you!
Robert Hughbanks
Gear Specialist
Gexpro
No problems at all, order was placed well after lunch time and it dispatched the same day
Sandy Leonard
Sales
International Transmission & Bearings
Very easy to place order
Lynn Crandall
Office Manager
Smith Control Systems Inc
Pricing can be high, but understandable for materials that will not have new production for months.
Andrew Macek
Buyer
Durr Systems
Response time is quick, good customer service. Nothing to complain about.
Francois Vermeulen
Project director
Dematic
Great service.
Mike Jagemann
Executive VP
Jagemann Plating Company
The Part I received was not going to work for what I needed but, this is about how easy it was to return for a full refund!
Cole
Maintenance
Hartung Glass
Very good service follows up on quotes and orders!
Max Flores
Inside Sales
Desert Hills Eelectric Supply Inc
Michael Wilde
Sr. Maintenance Manager
BIMBO BAKERIES USA INC.
was easy and fast and information of product made it easy to verify
Jeff Wirchball
Maintenance Supervisor
Steelworks Of The Carolinas
Maliha was wonderful. She got everything right the first try, formalized the quote and emailed it to me. The heavy lifting was done. I took care of ordering, address payment etc. Your website/portal was unusually easy to navigate (even by me).
Great experience from soup to nuts.
Alan Youngberg
Managing Partner
Premier LInen
Texnite provided a power supply module which saved our NYC power plant customer from an emergency outage. We placed our order late in the afternoon. Even though it was well past their same day shipping cutoff time, Texnite still made an extra effort to ship our order immediately and the module arrived before 8am the following morning.
Henry Zeylikovich
Manager
Sur-Seal
easy to order online. would order again..
John Ferraiolo
Treasurer
Ferraiolo Construction
The quote response was prompt. The "checkout" link in the email was very convenient.
Chris F
Shop Manager
Ponderosa Avionics, LLC
Item was as advertised and arrived in a concisely packaged and timely way
Dale Patuszynski
Purchasing Manager
Scientific Device Laboratory
With the current decline or non-existent customer service in the United States, it's great to deal with a company that does what it says it's going to do.
Russell
VP of Operations
Frey Ranch Distillery
Their response is quick.
Yurika Jamison
Puchasing Coordinator
Sumitomo Electric USA Holdings, Inc
prompt response in quote and gives best price & discount. Can ship immediately
Promise Mae Ibabao
Quality & Documentation Specialist/Purchasing
Summon Electronics Inc