Allen Bradley 1336-L6E

The 1336-L6E is the controller interface option for the 1336 series of the adjustable frequency AC drives manufactured by Allen Bradley. The 1336-L6E option comes with an encoder feedback and operates on 115 Volts AC. When replacing or installing the board, ensure that the power to the system is turned OFF and the DC bus voltage is 0 Volts DC. The bus capacitors can hold the charge even after the power is turned OFF so it is important to ensure that they are discharged before you touch the internal parts of the system. It is also important to prevent any electrostatic discharge to the equipment and necessary steps are to be taken to make sure the components of the system do not get damaged due to electrostatic discharge.

When connecting the 1336-L6E follow the wiring as mentioned by the manufacturer. Make sure all the connections are secured and there are no loose wires. Make sure the power supply voltage to the system is within the specified limits as mentioned to prevent any damage to the equipment.  The ambient operating temperature in which the device is to be operated should be between 0 to 50 degrees Celsius for an IP00 type of enclosure and it should be between 0 to 40 degrees Celsius for other IP rated enclosures. You may use heaters and coolers or fans to maintain the temperature within the operating range as stated by the manufacturer.  The 1336-L6E should be replaced by personnel trained on the system to prevent any accidents and also protect the equipment from damage.