Allen Bradley 1336-CONV-SP14A Used Surplus

The Allen Bradley 1336-CONV-SP14A DC BUS Fuse Replacement Kit is a DC fuse and Diode replacement kit for the 1336 Plus, Force, and Impact AC Digital drives with a 200A current rating, a 460 Volt AC voltage rating, and a 60 Horsepower output power rating. This fuse is located on the drive’s main chassis just between the drive’s power supply board and the main control board mounting plate; the fuse provides circuit protection from line surges. The 1336-CONV-SP14A fuse kit contains 200A rated Class CC fuse, which provides a drive’s designated short-circuit ratings. This module is installed on the drives main chassis via the following installation steps. Firstly, disconnect power from the drive, and check for zero Volts at the drive’s Terminal base (TB1) +DC and –DC Terminals. Attach the 200A Fuse from the DC BUS Fuse kit to fuse block bolt, and also attach the Diode (D2 supplied Diode) to the fuse block bolt. Fasten the fuse plus the supplied Diode to the fuse block using tighten the bolt with 11.0 to 12.5 N-m tightening torque. The base driver board, power supply board, and the main control board mounting plate is inserted into the drive. The drive is turned and check for installation status via LED light indicators on the drive.