Allen Bradley 1326AB-B410G-21-L Used Surplus

The Allen-Bradley 1326AB-B410G-21-L servo motor is a 460 Volts AC servo motor. The servo motor has an enclosure with an environmental protection rating of IP 67. With such protection, the servo motor is protected against dust and other particles. Also, with an enclosure with an IP 67 international protection rating, the 1326AB-B410G-21-L servo motor is protected against full immersion in water for up to 30 minutes at depths between 15 centimeters and 1 meter. The 1326AB-B410G-21-L servo motor uses a resolver device for feedback and it has an IEC metric flange. The motor has a shipping weight of 10 kilograms and a maximum rated speed of 5000 revolutions per minute.

The 1326AB-B410G-21-L servo motor has an apparent power rating of 1 kilowatt and a Horsepower rating of 1.3 Horsepower. The servo motor belongs to the Allen-Bradley 1326AB series of servo motors. Motors in this series are designed to be mounted and operated in environments with a relative humidity ranging between 5% and 95% without condensation. Additionally, these servo motors should be stored or operated in environments with a surrounding temperature ranging from -30 to 70 degrees Celsius and 0 to 40 degrees Celsius, respectively. The 1326AB-B410G-21-L servo motor features a thermostat that is normally used as a switch for a 15 Volts DC logic signal. The 1326AB-B410G-21-L servo motor, like other servo motors in the same series, features a specially engineered housing that reduces the motor length and increases the continuous torque ratings. Additionally, servo motors in the 1326AB series are designed to meet the demands of high-performance motion systems. The 1326AB-B410G-21-L servo motor can be mounted at any angle, allowing the shaft to face either down or up.