Speak with a real person who will go out of the way to help!
The picture shown is for representative purposes only. The actual product delivered corresponds to the part number you ordered.
- 1326ABA2E21A4
- DISCONTINUED BY MANUFACTURER
- SERVO MOTOR
- AC PERMANENT MAGNET
- 1326AB HIGH PERFORMANCE SERIES
- 108 MM FRAME DIAMETER
- 3000/4000 RPM
- 1.1 KW
- 3.6 NM
- 5.2 AMP
- IEC METRIC FLANGE WITH KEYWAY
- 8.1 NM BRAKE 90 VDC
- FACTORY WARRANTY DOES NOT APPLY. TEXNITE 1-YEAR WARRANTY INCLUDED
Texnite is not an authorized distributor, reseller, or representative of the products displayed or mentioned on this website. All product names, trademarks, brands, and logos used or referred to on this site remain the property of their respective owners. The depiction, description, or sale of products showcasing these names, trademarks, brands, and logos is solely for identification purposes and does not imply or intend to indicate any affiliation with or authorization by any rights holder.
Product is surplus. Manufacturer's warranties do NOT apply.
Allen Bradley 1326ab-a2e-21-a4 Used Surplus
Allen Bradley- 1326ABA2E21A4
- DISCONTINUED BY MANUFACTURER
- SERVO MOTOR
- AC PERMANENT MAGNET
- 1326AB HIGH PERFORMANCE SERIES
- 108 MM FRAME DIAMETER
- 3000/4000 RPM
- 1.1 KW
- 3.6 NM
- 5.2 AMP
- IEC METRIC FLANGE WITH KEYWAY
- 8.1 NM BRAKE 90 VDC
- FACTORY WARRANTY DOES NOT APPLY. TEXNITE 1-YEAR WARRANTY INCLUDED
QUICK DELIVERY
FREE SHIPPING
1 YEAR WARRANTY
EASY RETURNS
Technical Specifications for 1326AB-A2E-21-A4
Brand | Allen-Bradley / Rockwell Automation |
Series | 1326 Motors |
Part Number | 1326AB-A2E-21-A4 |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number / Catalog No | 1326AB-A2E-21-A4 |
Product Type | AC Servo Motor |
Max. Op. Speed | 3000 rpm |
Frame Diameter | 108 mm |
Rated Motor Speed | 3000 rpm |
Flange and Shaft Series | NEMA/IEC Metric Flange with Keyway |
Motor Rated Torque | N/A |
Motor Rated Output | 1.1 kW |
System Continuous Torque | 3.6 Nm |
System Peak Stall Torque | 10.84 Nm |
Standard Option | 72 lb.-in. (8.1 N-m) Holding Brake w/90V DC Coil |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1326AB-A2E-21-A4 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-A2E-21-A4 units instead of migration.
Brand | Allen-Bradley / Rockwell Automation |
Series | 1326 Motors |
Part Number | 1326AB-A2E-21-A4 |
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number / Catalog No | 1326AB-A2E-21-A4 |
Product Type | AC Servo Motor |
Max. Op. Speed | 3000 rpm |
Frame Diameter | 108 mm |
Rated Motor Speed | 3000 rpm |
Flange and Shaft Series | NEMA/IEC Metric Flange with Keyway |
Motor Rated Torque | N/A |
Motor Rated Output | 1.1 kW |
System Continuous Torque | 3.6 Nm |
System Peak Stall Torque | 10.84 Nm |
Standard Option | 72 lb.-in. (8.1 N-m) Holding Brake w/90V DC Coil |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1326AB-A2E-21-A4 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-A2E-21-A4 units instead of migration.
sAbout 1326AB-A2E-21-A4
The Allen-Bradley 1326AB-A2E-21-A4 AC Servo Motor is a high-performance, three-phase, synchronous motor from the 1326AB servo motor family. It comes with a NEMA/IEC Metric Flange with a keyway. The 1326AB-A2E-21-A4 Servo Motor can be used with the 1394 series of servo motor control systems. Its maximum operation speed and rated motor speed are 3000 rpm. The rated continuous torque (at 40 degrees Celsius) is 3.6 N-m. The rated maximum stall torque is 10.84 N-m. The 1326AB-A2E-21-A4 Servo Motor has a 108-millimeter frame diameter and a stack length of 2 millimeters. It includes a 72 pounds on an inch (8.1 N-m) holding brake with a 90 Volts DC Coil. The motor has 12.7 kilograms of weight. It can produce a rated output power of 1.1 kilowatts.
This AC servo motor contains two thermal switches wired in series that will open in an over-temperature condition. They are set to open at 150 degrees Celsius (typical) and close at 90 to 100 degrees Celsius (typical). It is recommended to use the motor within the operation temperature range 0 to 40 degrees Celsius, the relative humidity range is 5% to 95%, in a clean dry location and non–corrosive atmosphere. The 1326AB-A2E-21-A4 servo motor is IP 65 rated and it is suitable to function in harsh and extreme environments. When it is not used with a shaft seal option (when externally mounted encoder/resolver feedback or blower packages are used), then the motor loses its IP 65 rating. This motor includes a 1326-MOD-BPS Brake Power Supply option that converts 115 Volts AC to the voltage needed for 90 Volts DC brakes. It also has environmentally sealed power and feedback cable packages.
Technical Description of 1326AB-A2E-21-A4
The 1326AB-A2E-21-A4 servo motor is a high-performance AC servo motor that comes with a NEMA/IEC metric flange with a keyway. It has 1.1 kilowatts of motor rated output, 3.6 N-m of system continuous torque, 10.84 N-m of system peak stall torque, 3000 rpm of maximum operation speed, and 5.2 Amps of amperage rating at continuous torque. It includes an 8.1 N-m holding brake with a 90 Volts DC Coil.
From the net to the phone call, everyone was eager to help! They knew what they were talking about, and delivered what they promised! Doesn't get much better than that!
Thank you!
Robert Hughbanks
Gear Specialist
Gexpro
No problems at all, order was placed well after lunch time and it dispatched the same day
Sandy Leonard
Sales
International Transmission & Bearings
Very easy to place order
Lynn Crandall
Office Manager
Smith Control Systems Inc
Pricing can be high, but understandable for materials that will not have new production for months.
Andrew Macek
Buyer
Durr Systems
Response time is quick, good customer service. Nothing to complain about.
Francois Vermeulen
Project director
Dematic
Great service.
Mike Jagemann
Executive VP
Jagemann Plating Company
The Part I received was not going to work for what I needed but, this is about how easy it was to return for a full refund!
Cole
Maintenance
Hartung Glass
Very good service follows up on quotes and orders!
Max Flores
Inside Sales
Desert Hills Eelectric Supply Inc
Michael Wilde
Sr. Maintenance Manager
BIMBO BAKERIES USA INC.
was easy and fast and information of product made it easy to verify
Jeff Wirchball
Maintenance Supervisor
Steelworks Of The Carolinas
Maliha was wonderful. She got everything right the first try, formalized the quote and emailed it to me. The heavy lifting was done. I took care of ordering, address payment etc. Your website/portal was unusually easy to navigate (even by me).
Great experience from soup to nuts.
Alan Youngberg
Managing Partner
Premier LInen
Texnite provided a power supply module which saved our NYC power plant customer from an emergency outage. We placed our order late in the afternoon. Even though it was well past their same day shipping cutoff time, Texnite still made an extra effort to ship our order immediately and the module arrived before 8am the following morning.
Henry Zeylikovich
Manager
Sur-Seal
easy to order online. would order again..
John Ferraiolo
Treasurer
Ferraiolo Construction
The quote response was prompt. The "checkout" link in the email was very convenient.
Chris F
Shop Manager
Ponderosa Avionics, LLC
Item was as advertised and arrived in a concisely packaged and timely way
Dale Patuszynski
Purchasing Manager
Scientific Device Laboratory
With the current decline or non-existent customer service in the United States, it's great to deal with a company that does what it says it's going to do.
Russell
VP of Operations
Frey Ranch Distillery
Their response is quick.
Yurika Jamison
Puchasing Coordinator
Sumitomo Electric USA Holdings, Inc
prompt response in quote and gives best price & discount. Can ship immediately
Promise Mae Ibabao
Quality & Documentation Specialist/Purchasing
Summon Electronics Inc