Allen Bradley 1326-CPB1-060 Used Surplus

The Allen-Bradley 1326-CPB1-060 Series B servo motor power cable is a power cable for the 1326 servo motors and the 1394 motion control system. This cable is UL listed for all standard industrial applications, and it is designed to provide cabling solutions for standard applications. The 1326-CPB1-060 cable features a braided wire shield that provides superior levels of immunity to electromagnetic interference, and it supports the 1326 push/pull motor connector-end for simplified installation and maintenance. The 1326-CPB1-060 cable is compatible with the 1326AB-B5xx and 1326AB-B4xx servo motors, and it can also be used with the 1391B-ES or 1391-DES families of drives.  The 1326-CPB1-060 cable has a total length of 15 meters, and a maximum bend radius of 76.2 millimeters. This cable has a maximum diameter of 14 millimeters and an average connector diameter of 43.2 millimeters.

The 1326-CPB1-030 cable comes as a single-standard power cable with a sealed IP 65 enclosure rating that offers dust-free and water-tight protection in a harsh industrial environment. It offers a CE-compliant in-line connection solution within a cabinet wall, and it also supports a quick and low-cost cable solution outside of the cabinet wall. The 1326-CPB1-060 cable is a 10-wire designed power cable (2 brake wires, 3 power wires, 2 thermostat wires, 1 GND wire, and a shield ground wire) that comes in a cable assembly package. Each cable assembly package consists of a standard power cable and some installation accessories that include contact pins, an insulation body, a connector housing, and an installation manual. It is recommended to hang the cable vertically for 24 hours before installation to prevent internal cable twists and to relax the cable conductors.