Speak with a real person who will go out of the way to help!
The picture shown is for representative purposes only. The actual product delivered corresponds to the part number you ordered.
Description: The Allen-Bradley 1326-CCUT-L-030 cable is a single standard flex-rated commutation and feedback cable that is used with the bulletin 1326 series 460 Volts AC rated servo motors and the 1394 motion control system. It has a minimum bend radius of 101.6 millimeters, and a total cable length of 30 meters.
Texnite is not an authorized distributor, reseller, or representative of the products displayed or mentioned on this website. All product names, trademarks, brands, and logos used or referred to on this site remain the property of their respective owners. The depiction, description, or sale of products showcasing these names, trademarks, brands, and logos is solely for identification purposes and does not imply or intend to indicate any affiliation with or authorization by any rights holder.
Texnite is NOT an authorized distributor, affiliate or representative for the Manufacturer.
Product is surplus. Manufacturer's warranties do NOT apply.
Product is surplus. Manufacturer's warranties do NOT apply.
Allen Bradley 1326-CCUT-L-030
Allen Bradley
Description: The Allen-Bradley 1326-CCUT-L-030 cable is a single standard flex-rated commutation and feedback cable that is used with the bulletin 1326 series 460 Volts AC rated servo motors and the 1394 motion control system. It has a minimum bend radius of 101.6 millimeters, and a total cable length of 30 meters.
QUICK DELIVERY
FREE SHIPPING
1 YEAR WARRANTY
EASY RETURNS
Reviews
1326-CCUT-L-030
Description: Accessories for Motion Products
The product offered is sold as used surplus. Texnite is not an authorized surplus dealer or affiliate of the Manufacturer associated with this product. It's possible that the product may contain older date codes or belong to an earlier series compared to items available directly from the factory or authorized dealers. As Texnite is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply.
Although numerous Allen-Bradley PLC products may contain pre-installed firmware, Texnite does not confirm whether a PLC product has firmware or if the firmware corresponds to the revision level required for your specific application. Additionally, Texnite does not guarantee or imply your capability or entitlement to download or acquire firmware for the product from Rockwell, its distributors, or any other source. Furthermore, Texnite does not assert your right to install any such firmware on the product. Texnite neither obtains nor provides firmware on behalf of customers. It remains your responsibility to adhere to the terms stated in any End-User License Agreement or a similar document related to obtaining or installing firmware.
Technical Specifications for 1326-CCUT-L-030
| Brand | Allen-Bradley / Rockwell Automation |
| Series | 1326 Motors |
| Part Number | 1326-CCUT-L-030 |
| Description | Commutation and Encoder Cable |
| Voltage | 460 Volts AC |
| Application | Standard and Flex-rated |
| Shielding | Braided Shield Wire |
| Quantity | 1 |
| Connection Type | Local and Remote In-line Connection |
| Ingress Rating | IP67 |
| Cable Lenght | 30 meters |
| Bend Radius | 101.6 millimeters |
| Number of Wires | 10 |
| Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1326-CCUT-L-030 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326-CCUT-L-030 units instead of migration.
| Brand | Allen-Bradley / Rockwell Automation |
| Series | 1326 Motors |
| Part Number | 1326-CCUT-L-030 |
| Description | Commutation and Encoder Cable |
| Voltage | 460 Volts AC |
| Application | Standard and Flex-rated |
| Shielding | Braided Shield Wire |
| Quantity | 1 |
| Connection Type | Local and Remote In-line Connection |
| Ingress Rating | IP67 |
| Cable Lenght | 30 meters |
| Bend Radius | 101.6 millimeters |
| Number of Wires | 10 |
| Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1326-CCUT-L-030 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326-CCUT-L-030 units instead of migration.
sAbout 1326-CCUT-L-030
The Allen-Bradley 1326-CCUT-L-030 commutation/encoder cable is a commutation cable for every 460 Volts AC rated Allen-Bradley 1326AB series servo motors. This cable is designed to provide feedback cabling solutions to Allen-Bradley 1394 motion control systems. The 1326-CCUT-L-030 cable is a cable assembly comprising one single-standard commutation and encoder cable, contacts, and an insulation body. It has a braided shield design that offers superior shielding from electromagnetic interference (noise) that may arise from an external electrical source. The 1326-CCUT-L-030 supports an in-line connection solution within the cabinet wall that meets CE requirements and it also supports remote cable connections outside the cabinet. The 1326-CCUT-L-030 cable has a flex-rated design that is ideal for 1394 high-flex power track applications, and it supports the molded push/pull connector at the motor end for simplified field installations.
The 1326-CCUT-L-030 cable is environmentally sealed to meet IP 67 protection ratings, and this rating confers dust-tight and temporary water-proof protection even in harsh industrial conditions. It has a maximum cable length of 30 meters with a 101.6-millimeter bend radius, and an approximate cable diameter of 10.1 millimeters. The 1326-CCUT-L-030 cable has 9 individually isolated wires (3 black, 1 white, 1 red, 1 green, and 3 shield wires) with a 0.52 Gauge average wire size and overall shielding. It has 6 connector pins (A, B, D, E, G, and H) and a termination points 1 through 10 on the system module. The 1326-CCUT-L-03 cable has an approximate cable height of 110 millimeters, and a maximum connector diameter of 36.6 millimeters. It is recommended to hang the cable or lay it flat for 24 hours before installation to relax the conductor and to guard against internal twisting.