Allen Bradley 1326AB-B530E-M2K5L Used Surplus

The 1326AB-B530E-M2K5L Torque Plus AC Servo Motor is a 3-phase AC servo motor belonging to the Allen-Bradley 1326AB servo motor family that is built for the tough demands of a wide range of industrial motion control systems. This AC motor has a special permanent magnet rotor that offers cost-effective servo response and performance, and it has a specially engineered housing that improves motor torque-to-size ratio. The 1326AB-B530E-M2K5L Servo Motor is a 3-phase motor with a 460 Volts AC rating and an acceptable operating voltage range of 380 Volts AC to 460 Volts AC. It has a power rating of 4 Kilowatts and a base rotor speed of 3000 RPM. The 1326AB-B530E-M2K5L Servo Motor has a torque rating of 160 pounds on an inch at 9.5 Amps of system current rating and a peak torque rating of 480 pounds on an inch at 28.5 Amps of peak stall current rating.

The 1326AB-B530E-M2K5L Servo Motor has a multi-turn high-resolution encoder that offers absolute positioning feedback within multiple revolutions (up to 4096 revolutions) and this encoder device does not require a battery for operation. It has a spring-set 24 Volts DC holding brake option with 120 pounds on an inch of holding torque. The 1326AB-B530E-M2K5L Servo Motor has a total frame size of 100 millimeters and a net stack length of 30 millimeters. Like all Allen-Bradley 1326AB servo motors, the 1326AB-B530E-M2K5L Servo Motor comes with an environmentally-sealed feedback and power cable that is connected in rear-end connector configuration. The 1326AB-B530E-M2K5L Servo Motor has an IP 67 protection rating and a rated operating temperature range of 0 to 40 degrees Celsius. It has a net shipping weight of 76 pounds (motor only) and is designed for use within 5 to 95% (non-condensing) relative humidity.