Speak with a real person who will go out of the way to help!
The picture shown is for representative purposes only. The actual product delivered corresponds to the part number you ordered.
- 1326ABB515G21K5
- DISCONTINUED BY MANUFACTURER
- SERVO MOTOR
- AC PERMANENT MAGNET
- 1326AB TORQUE PLUS SERIES
- 460/380 VAC
- 149 MM FRAME DIAMETER
- 5000 RPM
- 2.9 KW
- 10.4 NM
- 7.5-9.5 AMP
- IEC METRIC FLANGE WITH KEYWAY
- RESOLVER BASED FEEDBACK
- 13.6 NM BRAKE 24 VDC
- FACTORY WARRANTY DOES NOT APPLY. TEXNITE 1-YEAR WARRANTY INCLUDED
Texnite is not an authorized distributor, reseller, or representative of the products displayed or mentioned on this website. All product names, trademarks, brands, and logos used or referred to on this site remain the property of their respective owners. The depiction, description, or sale of products showcasing these names, trademarks, brands, and logos is solely for identification purposes and does not imply or intend to indicate any affiliation with or authorization by any rights holder.
Product is surplus. Manufacturer's warranties do NOT apply.
Allen Bradley 1326AB-B515G-21-K5
Allen Bradley- 1326ABB515G21K5
- DISCONTINUED BY MANUFACTURER
- SERVO MOTOR
- AC PERMANENT MAGNET
- 1326AB TORQUE PLUS SERIES
- 460/380 VAC
- 149 MM FRAME DIAMETER
- 5000 RPM
- 2.9 KW
- 10.4 NM
- 7.5-9.5 AMP
- IEC METRIC FLANGE WITH KEYWAY
- RESOLVER BASED FEEDBACK
- 13.6 NM BRAKE 24 VDC
- FACTORY WARRANTY DOES NOT APPLY. TEXNITE 1-YEAR WARRANTY INCLUDED
QUICK DELIVERY
FREE SHIPPING
1 YEAR WARRANTY
EASY RETURNS
Technical Specifications for 1326AB-B515G-21-K5
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1326AB-B515G-21-K5 |
Product Type | Servo Motor |
Voltage | 460/380V AC |
Frame Diameter | 149 mm |
Rated Motor Speed | 5000 rpm |
Flange and Shaft Series | IEC Metric Flange with Keyway |
Motor Rated Torque | 10.4 Nm |
Motor Rated Output | 2.9 kW |
System Continuous Torque | 10.4 Nm |
System Peak Stall Torque | 31.2 Nm |
Standard Option | 13.6 Nm Holding Brake w/ 24V DC Coil |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1326AB-B515G-21-K5 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-B515G-21-K5 units instead of migration.
Manufacturer | Rockwell Automation |
Brand | Allen-Bradley |
Part Number/Catalog No. | 1326AB-B515G-21-K5 |
Product Type | Servo Motor |
Voltage | 460/380V AC |
Frame Diameter | 149 mm |
Rated Motor Speed | 5000 rpm |
Flange and Shaft Series | IEC Metric Flange with Keyway |
Motor Rated Torque | 10.4 Nm |
Motor Rated Output | 2.9 kW |
System Continuous Torque | 10.4 Nm |
System Peak Stall Torque | 31.2 Nm |
Standard Option | 13.6 Nm Holding Brake w/ 24V DC Coil |
Product Lifecycle Status* | Discontinued/Obsolete |
*The Allen Bradley 1326AB-B515G-21-K5 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement 1326AB-B515G-21-K5 units instead of migration.
sAbout 1326AB-B515G-21-K5
The Allen-Bradley 1326AB-B515G-21-K5 is a servo motor which is RoHS compliant. The legacy servo motors are function, form, and fit replacements that are supposed to be used for the original motors by Rockwell Automation/Allen-Bradley. This servo motor has a voltage of 460/380V AC. It also features a 149 mm frame diameter. The 1326AB-B515G-21-K5 motor has a rated speed of 5000 rpm. For the flange and shaft series devices, it exhibits an IEC metric flange with a keyway. It also has a rated motor torque of 10.4 Nm. In addition to the rated motor torque, it also has a motor rated output of 2.9 kW. The servo motor also has a system peak stall torque of 31.2 Nm and a standard option of 13.6 Nm brake w/24V DC Coil.
The 1326AB-B515G-21-K5 Servo Motor has a variety of features including a listed UL insulation system, special profile permanent flux magnets, an extruded aluminum housing that allows for an improved heat transfer, a 100% continuous-rated output torque when the machine is stalled, a metric flange mount that has metric shafts (CEI/IEC 72-1), a threaded hole that is located on the shaft’s face and which is used for the purposes of securing couplings, and a TENV construction.
The 1326AB-B515G-21-K5 has an integral holding brake which is spring-set when the power is removed. When there is an emergency stop, it provides limited braking torque and is also designed for holding a load while at rest. The user has to be careful not to continuously cycle the brake for the purpose of stopping a load. Neither should the braking torque be used when positioning a brake. The 1326AB-B515G-21-K5’s brake cannot always be energized or de-energized more than 90 times in an hour especially when it is being used as a parking brake because this might result in property damage or cause personal injury.
Technical Description of 1326AB-B515G-21-K5
The Allen-Bradley 1326AB-B515G-21-K5 has a 460/380V AC Voltage, a 149 mm Frame Diameter, and a 5000 rpm Rated Motor Speed. It also contains a 10.4 Nm System Continuous Torque and a 2.9 kW Motor Rated Output.
From the net to the phone call, everyone was eager to help! They knew what they were talking about, and delivered what they promised! Doesn't get much better than that!
Thank you!
Robert Hughbanks
Gear Specialist
Gexpro
No problems at all, order was placed well after lunch time and it dispatched the same day
Sandy Leonard
Sales
International Transmission & Bearings
Very easy to place order
Lynn Crandall
Office Manager
Smith Control Systems Inc
Pricing can be high, but understandable for materials that will not have new production for months.
Andrew Macek
Buyer
Durr Systems
Response time is quick, good customer service. Nothing to complain about.
Francois Vermeulen
Project director
Dematic
Great service.
Mike Jagemann
Executive VP
Jagemann Plating Company
The Part I received was not going to work for what I needed but, this is about how easy it was to return for a full refund!
Cole
Maintenance
Hartung Glass
Very good service follows up on quotes and orders!
Max Flores
Inside Sales
Desert Hills Eelectric Supply Inc
Michael Wilde
Sr. Maintenance Manager
BIMBO BAKERIES USA INC.
was easy and fast and information of product made it easy to verify
Jeff Wirchball
Maintenance Supervisor
Steelworks Of The Carolinas
Maliha was wonderful. She got everything right the first try, formalized the quote and emailed it to me. The heavy lifting was done. I took care of ordering, address payment etc. Your website/portal was unusually easy to navigate (even by me).
Great experience from soup to nuts.
Alan Youngberg
Managing Partner
Premier LInen
Texnite provided a power supply module which saved our NYC power plant customer from an emergency outage. We placed our order late in the afternoon. Even though it was well past their same day shipping cutoff time, Texnite still made an extra effort to ship our order immediately and the module arrived before 8am the following morning.
Henry Zeylikovich
Manager
Sur-Seal
easy to order online. would order again..
John Ferraiolo
Treasurer
Ferraiolo Construction
The quote response was prompt. The "checkout" link in the email was very convenient.
Chris F
Shop Manager
Ponderosa Avionics, LLC
Item was as advertised and arrived in a concisely packaged and timely way
Dale Patuszynski
Purchasing Manager
Scientific Device Laboratory
With the current decline or non-existent customer service in the United States, it's great to deal with a company that does what it says it's going to do.
Russell
VP of Operations
Frey Ranch Distillery
Their response is quick.
Yurika Jamison
Puchasing Coordinator
Sumitomo Electric USA Holdings, Inc
prompt response in quote and gives best price & discount. Can ship immediately
Promise Mae Ibabao
Quality & Documentation Specialist/Purchasing
Summon Electronics Inc