Allen Bradley 1326ab-b515e-21-k5

The Allen-Bradley 1326AB-B515E-21-K5 is a ferrite AC Servo Motor that comes with a voltage rating of 460V AC, as well as rated speeds of 2500 rpm at 380V AC and 3000 rpm at 460V AC. Both its system and motor rated torques are 92 pounds on the inch or 10.4 N-m and it has a 2.3 kW motor rated output. If connected to a 1394-AM07 axis module, this motor has a 25.6 N-m system peak stall torque, 15 A system peak stall current, 6.1  system continuous stall current, and a 7.7 N-m system continuous torque. But when used with the AM04 axis module, the 1326AB-B515E-21-K5 motor has a 15.4 N-m system peak stall torque, 9 A system peak stall current, and a 4.5 A system continuous stall current.

This motor also has a frame diameter of 149 mm, a bolt center of 165 mm, and a magnet stack length of 1.5 inches, as well as an IEC metric flange with a keyway for this motor’s shaft and mounting. To mount the 1326AB-B515E-21-K5 motor, make sure that it is mounted vertically and with its shaft either up or down. Also found on this motor is a three-phase sinusoidally-wound stator field capable of transferring the heat from the motor to the ambient temperature and it results in improved operations at low speeds, an enclosure rating of IP65, and a TENV-constructed aluminum housing with fins installed to aid in cooling. The 1326AB-B515E-21-K5 motor is only compatible with 230V AC Digital AC Servo Drives from the 1391 series that have high-performance motions.