Allen Bradley 1326AB-B410G-21

The 1326AB-B410G-21 servo motor has been designed and manufactured by Rockwell Automation under its Allen-Bradley brand in the Allen-Bradley Torque Plus Series. It runs on either 380 Volts AC or 460 Volts AC voltage. The 1326AB-B410G-21 servo motor’s torque ratings are 2.7 N-m of motor rated torque, 2.7 N-m of system continuous torque, and 6.6 N-m of system peak stall torque. Its rated speed in RPM is 5000 RPM at 460 Volts AC and 4000 RPM at 380 Volts AC. The 1326AB-B410G-21 servo motor’s rated output is 1 kilowatt of output power, its system continuous stall current is 2.45 Amps while its system peak stall current is 6 Amps.

The Allen-Bradley 1326AB-B410G-21 Torque Plus Series servo motor is capable of 100% continuous rated output torque even when it is stalled and at 0 RPM. Some of the other key features of the 1326AB-B410G-21 servo motor include UL-listed insulation, extruded aluminum housing that improves heat transfer and reduces the risk of overheating, an IEC metric mounting flange a keyway, and a threaded hole on the face of the shaft that can be used to secure the couplings. This servo motor is powered by magnets. Its magnets are special flux profile permanent magnets that are specially engineered by Allen-Bradley to increase the servo response. This servo motor can be mounted vertically with the shaft facing up or down and at any angle. The 1326AB-B410G-21 servo motor has a standard IP 65 protection rating, which can be increased to an IP 67 protection rating if optional shaft seals are added.